Tomar signals with dz1000's

christhetrainguy09OGR Forum Member

I have a quick question for the electronically gifted people on the forum. I purchased some Tomar Industries o scale dwarf signals for a very reasonable price and was seeking help hooking them up to the dz1000's for signaling. From looking at the wiring diagram it requires 12.5v dc power source and 270 ohm resistor on each (-) lead of the l.e.d

3/26/143:44 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Mike CTOGR Forum Member

You would have to add a DZ 1008 relay module to the DZ 1000 switch machine.

Relay module wiring diagram. Click on the underlined phrase to access. This should provide a Common, Normally Open, and Normally close for your dwarf light switching.

12.5 volt DC and a 270 ohm resistor would be a separate DC power source and resistor.

Can you provide a wiring diagram?? provided with the Tomar dwarf lights.

3/26/144:39 PM

❤️ 0

christhetrainguy09OGR Forum Member

It's not a wiring diagram, it's more like a sheet that tells you what 2 wires get the resistor and which one is a power wire, they don't tell you how to hook it up to your layout.

3/27/1410:04 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!