Is the Lionel #14113 and # 14114 transfer table and extension compatible with Gargraves track as well as other 3 rail track
Thanks for your comment.
pufferbelly1
Original Post
Replies sorted oldest to newest
Well, not directly, though it can be made to work. It's designed for tubular track.
If you are trying to mate Lionel O gauge tubular track to Gargraves you need Gargraves adapter pins for O gauge. Lionel and other brands of 027 track use a different pin, the adapter pins look very close but you need the proper pin for the proper track.
I have not seen any Fastrack adapter pins, so you would need to go to tubular in the Fastrack section then to Gargraves. Same thing for Realtrax by MTH, you must go to tubular with the MTH adapter section then go to Gargraves with adapter pins.
Gargraves or Atlas make adapter pins to use with Atlas track but they don't work correctly and the pins will bend unless the track is mounted on both sides of the track to something.
Not 100% sure this will work; but have heard that some people use the Atlas track connectors with Gargraves track, just open the Atlas connector some with a pair of pliers and slide it over the ends of the Gargraves track.
Lee Fritz
This thread may prove useful...
