Can a P1 Subway be updated to the new P3 board and still retain the original subway stops , etc, that were in the P1 version?
Original Post
Replies sorted oldest to newest
Only if a PS3, or PS2 3 volt, sound file exists that has those station stops.
Yes - I have done the upgrade job on a NYC subway car. Lights on a PS3 upgrade are numerous and you can get more than PS1. Plenty of room inside, just be careful and do not pinch any wires. Sound files are out there, make use you get the correct 3v file and download the zip file. You need the 'flash' for the 3v sound file. Follow the instructions for uploading the sound files carefully. Good luck.
bruce
bruce benzie posted:Yes - I have done the upgrade job on a NYC subway car. Lights on a PS3 upgrade are numerous and you can get more than PS1. Plenty of room inside, just be careful and do not pinch any wires. Sound files are out there, make use you get the correct 3v file and download the zip file. You need the 'flash' for the 3v sound file. Follow the instructions for uploading the sound files carefully. Good luck.
bruce
You mean you use the flash code for the PS-3 Sound File for a subway, but load the 3V sound file of the engine sounds you want. G
