Anyone have a video of the B&O Lionmaster Class A steam engine

I have the ATSF Class A, but except for markings it should be the same locomotive.  What did you want to see/know?

My apologies sinclair for delay in getting back to you. For some reason the replies to my posts are going to my junk box.

I was looking to see how the engine looked size wise and how the whistle sounded.

I'll work on trying to get some visuals posted this weekend for you.

These sound and look great. The main complaint when they were released was that Lionel used a "less than Legacy" type of speed control and theses locos have a higher start speed and go from zero to 100 in a short turn of the throttle knob. The TMCC version from 2003 is actually a smoother runner.

Heres a video of the N&W version sounds on the B&O are likely the same ( not mine)

Heres a video of the TMCC version for comparision (also not my video)

Here are a couple videos of the locomotive in action.  One I'm doing some switching while in sequence control, and the other is running past a scale diesel.  The freight is a mix of scale and traditional cars.  Also included are a couple photos of it nose to nose with a scale Heavy Mikado and a scale Big Boy behind it.  Like said above, it goes from 0 to 60 in 2 seconds.  I have it speed limited at speed step 70.  If it goes much over speed step 100, it will fly off of an O72 curve (Don't ask how I know.  Lets just say there is a dent in the wall and not the floor thankfully.) while I have no issues with the scale Big Boy going full throttle around the loop.