I don't feel like buying another 3 powered Fastrack sections, since I have a bunch of leftover Fastrack 10" straights sections.
I thought I read on these forums somewhere that you can connect power to the existing "tabs" on the straights to make it powered, but I don't see any tabs to connect to like the block sections have.
Replies sorted oldest to newest
The bottom of each 10" Fastrack (and curved pieces as well) have the little tabs to connect the power... only difference is the cutout to the roadbed. EDIT: assuming the piece of track hasn't been modified in some way.
Since I feed power from underneath my table, I used regular 10" pieces instead of the "real" powered sections.
Borrowing this post for the pictures:
https://ogrforum.com/d...ent/2415514336613457
See the thing shaped like a capital letter "I"? Them's the tabs.
I swear I am going blind..2nd time today...I took the darn thing and put it under the kitchen light and bam! I see the tab...thanks. Working like a charm now!
Access to this requires an OGR Forum Supporting Membership
