Weird Acting Remote Switches

KyreaOGR Forum Member

I have two legacy controlled remote switches. They are NOT wired so signal comes through track. They will NOT switch unless I hover my hand about four inches above the switch. I’m not touching anything. With hand hovering, both switches work fine. All my others work without the hovering hand. Any ideas how to fix? Thanks

9/29/2112:45 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Mellow Hudson MikeOGR Forum Member DIGITAL SUBSCRIBER

Kyrea,

The antenna connection inside the switch needs to be fiddled with. Your hand, when it's nearby, is helping the antenna do it's job, because it's too compromised to do it's job alone.

This issue has come up on the forum many times. Do a search for "FasTrack Switch" and "Antenna" using the Forum search to see some good solutions.

Mike

9/29/2112:54 PM

❤️ 0

KyreaOGR Forum Member

Thanks so much. I will look it up.

9/29/216:47 PM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

Weird Acting Remote Switches

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!