Have a new GG1 that has problems with the front truck not going thru switches. Truck wants to lift up and not follow the route. None of the other Williams engines or MTH have this issue. I have 72 " switches and mth real track. Thanks for reading and any help you have.
Replies sorted oldest to newest
Hi Jim:
I'm not joking with you - I've got one of these as well, had the same problem. When I took the truck off to see if something was bent or whatever, I found a tiny piece of cardboard from the packaging stuck in the pivot point. Okay now. Runs great on my 042 curves.
If that is not the problem, try it the other direction and see if it works. If so, take off the shell, reverse the Motor leads, and put the shell on in reverse if the screw holes are in the same location.
Access to this requires an OGR Forum Supporting Membership
