Does anyone make them? I'm thinking of redoing the outer loop on my layout using 090 curves, but so far I haven't been able to find an 090 WYE I need.
Original Post
Replies sorted oldest to newest
Are you talking about a curve-replacement type wye turnout? If so, I don't think anyone has one. The closest shot would be cutting down a Ross 11-degree wye (+/- 5.5 degrees) and add curved tracks as required.
Ross doesnt do a very good job making it known, but they also make a 22 degree wye (11 deg each way). The number is #158, they dont have a PDF of it online, but I have one I can measure if you want. Its pretty short, probably 11-12".
Ross doesnt do a very good job making it known
Yeah, I looked at Ross and Gargraves before I posted and didn't see either of the Wyes you guys mentioned, thanks guys 
Here 'tis Bob Ross #157 11° Wye 5.5° x 2
Thanks for the link moonman! Now all I have to do is figure out how to print longer paper. I can tape 2 pieces together but I'm not sure if the printer will accept the longer length, it'll have to be about 16".
If you print from Adobe Reader, you can select the printer preferences. The printer I have allows me to define the paper size in a "custom" option, which would be the two pieces taped together. I chose portrait orientation 8.5" x 21".
Save the .pdf to your computer and then open it with reader. Hopefully your printer will allow you to do the same.
That worked fine (after the 3rd try!), thanks
