I can use some info & advice on 1033 transformer repair. I'm trying to get the spring loaded whistle handle to return all the way. I put a new spring in and it still doesn't return as it should?
Does it return OK when the case is off? I have found that sometimes the spring ends are not snipped off short enough and the whistle return spring binds on the top of the case. If so, add some small spacer washers between the case and transformer frame to lift the top of the case slightly.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!