These are the ones that go up the ramp and then center discharge. I acquired 3 (2nd hand) for my Kline coal dump accessory. One came with the trucks not attached. I can take a good one apart to see what is missing but before I do that and break something I thought I would ask how to take off the end units. There is a tab that sticks up through the bottom of the hopper that is bent over and another smaller tab resting on the sill on the end. All 3 look the same. I started to mess with them but they are very hard metal, I'm assuming the end over the sill should push in to release it but the sill is plastic and I do not want to break it. I have to pop 3, a good one for an example and then the 2 missing ones. The shaft that comes up off the truck is topped by a screw, not grooved for a C-Clip. I can't quite see into the space real well. Old eyes and a black finish are not my friends.
Any thoughts graciously welcome.
frank
Edit: I transposed the numbers and used the wrong description. Doh!
