Well finally completed the set. Got the 2353T hooked up to the 2343C unit and the 2353 A unit. Well Noticed some problems. After about 6 rotations on a oval track 8 curved and ten straight my trip light goes off. I also noticed the the tender unit seems to be pulling the 2343C unit off the track right after the curves. My setup is all foward. Nose/tail,Nose/tail,nose/tail. I think that the front coupler is not giving to full range of motion and is pulling it off track. I also noticed that when I hit the horn seems like there is a power shortage and both units lights flash. Maybe this is normal since there is another unit but im not sure. I took off the shell to the tender unit to see if there is any catching seems like there might be a little. Also When I lift the unit the front truck appears to hang more than the power unit. I looked for washers/spacers to be loose and didnt see any. Also the coupler came undone. Didnt have much time to get into it hard but maybe everyone on here can give me some tips on smoother action and travel. All wheels a spinning freely. Pickups are clean.
Thanks
