Adding Pickup Roller to PS2 and PS3 Engines

GARY SEEK 081719OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

John, from your 3-23-18 post, did you indeed post photo series showing your GS4 conversions/upgrades?? I am in process of MTH GS4 upgrade to PS3 and ran into the "pick-up" discussion, so wanted to insure I do ALL that is needed while inside the Loco and Tender?!? Your advice and guidance is greatly appreciated, G in Roanoke.

1/17/204:40 PM

❤️ 0

Original Post

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Well, not sure what post that might be, but the only thing I do is connect a 1.1A to 1.5A PTC between the locomotive and tender roller connection. This prevents wire meltdown if you derail one of the units and the roller lands on the outside rail.

1/17/205:33 PM

❤️ 1

CLICK HERE and Subscribe to the OGR YouTube Channel!

Adding Pickup Roller to PS2 and PS3 Engines

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!