Atlas O Turntable #6999 sparks

gmach5OGR Forum Member

The turntable is wired for AC operation and double checked Also, I have a ZW-L transformer that is powering the yard and the track on the turntable. Same channel for both

i Have installed this turntable and I am using an old boxcar to test. If I push the box car from the yard onto the round table track it sparks. The only way that I can prevent this is to change the polarity of the turntable wiring. Not sure if this is normal or could hurt my engines. The layout is wired for DCS and Legacy.

Thank you!

4/21/1911:11 PM

❤️ 0

Original Post

Replies sorted oldest to newest

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

If reversing the polarity of the TT wiring fixes it, why not leave it that way. It seems apparent that it's backwards now from that description.

4/22/198:27 AM

❤️ 0

gmach5OGR Forum Member

Sounds good to me!

Thank you!

4/22/199:14 AM

❤️ 0

gmach5OGR Forum Member

This is what I received from Atlas regarding the new turntable #6999.

The directions are backwards.

The instructions are backward, Fig 3 is backwards you have to reverse the A and U. This instructions will be fixed on the next run.

The instructions were written before the final engineering was finished.

Thanks,

Bill Serratelli

O Scale Technical Consultant

Atlas Model Railroad

378 Florence Ave.

Hillside, NJ 07205

908-687-0880 x7132

908-687-8857 Fax

Visit us on the Web

Become a fan on Facebook

"You're on the Right Track...with Atlas"

This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply email and delete this message. Thank you for your

4/30/191:38 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Interesting, that would explain his issues!