Skip to main content

Originally Posted by trainroomgary:

The grand children are coming over tomorrow, so I walk to the public library today and check out the “Shark Train” & purchase the “C is for Caboose” from “The Friends of the Library.

Gary

• Cheers from The Detroit & Mackinac Railway

OGR Forum Cis for Caboose & Shark Train

I can see it now...Sharknado 4: Sharks on a Train.  Sharktraino?

Haven't bought much lately but today I went to my favorite antique store while I was out doing rail photos. Glad I stopped. They had just got in a very nice Lionel 736 Berkshire with the 2761WX tender it really great shape. The 76 had been at the top of my list so I brought it home. Not a bargain price but fair. Runs smooth and quiet.  It is clean but I haven't lubed it yet but will.

Originally Posted by Moonson:
Originally Posted by Country Joe:

...

IMG_2333

Mr. Country Joe, (You didn't mention it, nor did you ask for my two-cents-worth-waitin-for-change, but I just gotta say,) I think I see a nice alleyway taking shape there - a possible home for those sharp new barrels?

FrankM.

FrankM

You are starting to worry me. Why are you starting to lerk in our alleys?

Originally Posted by Moonson:
Originally Posted by Country Joe:

...

IMG_2333

Mr. Country Joe, (You didn't mention it, nor did you ask for my two-cents-worth-waitin-for-change, but I just gotta say,) I think I see a nice alleyway taking shape there - a possible home for those sharp new barrels?

FrankM.

There's nothing in that alleyway right now but I like you're idea so thanks for adding your two cents.

Originally Posted by Country Joe:
Originally Posted by Moonson:
Originally Posted by Country Joe:

...

Mr. Country Joe, (You didn't mention it, nor did you ask for my two-cents-worth-waitin-for-change, but I just gotta say,) I think I see a nice alleyway taking shape there - a possible home for those sharp new barrels?

FrankM.

There's nothing in that alleyway right now but I like you're idea so thanks for adding your two cents.

Your convivial reply is certainly much appreciated and fits the overall social atmosphere of OGR, doesn't it. FrankM.

Originally Posted by suzukovich:
Originally Posted by Moonson:
Originally Posted by Country Joe:

...

Mr. Country Joe, (You didn't mention it, nor did you ask for my two-cents-worth-waitin-for-change, but I just gotta say,) I think I see a nice alleyway taking shape there - a possible home for those sharp new barrels?

FrankM.

FrankM

You are starting to worry me. Why are you starting to lerk in our alleys?

Oh, I be a-lurkin' all right; in fact, I actually took a couple photos of an alleyway along Rt.11 in Upstate NY recently (though they came out poorly.) Yes. Indeed. I am out there watching and examining.

 

The ones I've shown on an "Alley" thread I initiated are...

 

...behind here...

IMG_0124

...and in here....

IMG_0018

FrankM.

Attachments

Images (2)
  • IMG_0124
  • IMG_0018
Last edited by Moonson

The new Trains special edition on N&W 611 was at the Barnes & Noble store so I bought a copy today.

It was pretty good. I saw the locomotive as a kid in the park at Roanoke before the flood, and then running several times after that. I probably live way more than 1000 miles from the nearest NS tracks and might never see her again, but I'm so glad she's back in steam.

I enjoy reading train books.

     This one is "Hollywood Trains" by J. C. Squares & J. Spencer Beck

First Copyright date is 1941© - last Copyright 1994©

     This is a reference book about Hollywood, how they use their top stars in pictures about trains. The book is printed in high contrast, black & white, 

    You railroad puffs, may enjoy this book.

• Gary - Cheers from The Detroit & Mackinac Railway - Click on cover to enlarge. 

Hollywood Trains by J C Suares & J Spencer Beck

Attachments

Images (1)
  • Hollywood Trains by  J C Suares & J Spencer Beck

I have been getting a few big ticket items (big ticket for me) before I retire.  Good thing, I accepted a 'voluntary' Early retirement package last week, just in case they decided to put me out to pasture with no hay.  I don't need this now, but thought I would get it when the price was so attractive. This ZW works, and since I worked in electronics for 39 years, I should be able to keep it going.  This is the seller's photo, so don't ask me about the pear shaped candles at the top of the photo, that or strange light bulbs.  lol  I'll have some fun seeing what it will do, I've never used one before.  (I mean a ZW, not pear shaped candles even though I've never seen those before either)

 

image

Attachments

Images (1)
  • image

Hey Mark-

Great looking transformer.  Hope it works out for you ok.  One word to the wise:

Don't forget to install and use a "TVS Diode" across each of the four ZW outputs.

I also have a few around the layout, installed across the clips of a standard Lockon..

Bought them from Mouser.  Inexpensive.  Also got some 10-amp resettable circuit breakers from Mouser.  All this stuff is to protect your locomotives containing circuit board memory modules.

If you DO NOT do this, the memory boards will stare at you and say:  "Who are you!"

 

Cheers..  your buddy.

 

KRK

Originally Posted by keyrouteken:

Hey Mark-

Great looking transformer.  Hope it works out for you ok.  One word to the wise:

Don't forget to install and use a "TVS Diode" across each of the four ZW outputs.

I also have a few around the layout, installed across the clips of a standard Lockon..

Bought them from Mouser.  Inexpensive.  Also got some 10-amp resettable circuit breakers from Mouser.  All this stuff is to protect your locomotives containing circuit board memory modules.

If you DO NOT do this, the memory boards will stare at you and say:  "Who are you!"

 

Cheers..  your buddy.

 

KRK

Ken,

Thank you for the tip.  I recall you mentioning the TVS diode before.  Yes, it doesn't take much to make memory boards dumb.

 

Buy anything cool lately? - I think so.

 

Picked up these two MTH PRR Geeps.  The lead unit is GP9 #7001 which started out as an old MTH Premier loco equipped with only horn & bell.  I ditched the innards and turned it into a dummy unit.  I kept just enough electrical for a headlight on the long end and interior cab lights. I installed cab figures facing in the proper (long hood forward) direction and the snow/rock plow. 

 

The trailing unit is GP7 (with dynamic brake) #8571. The PRR's initial order of GP7's did not include dynamic brakes but they quickly changed their mind and began ordering WITH dynamic brakes before changing over to ordering the GP9 model.  This is an old MTH Premier loco as well but equipped with PS1.  I removed two cab figures, disabled all but the marker lights, re-wired the motors in serial (just like a Williams) and replaced some traction tires. Although it's conventional it runs really well even at lower speeds. The PS1 sounds aren't bad and are certainly way better than no sounds at all.

 

I elected to run the dummy unit first since I wanted to run long hood forward. The powered unit starts up and runs in the default, factory direction (short hood forward) which is fine by me if it's the trailing unit. I plan to run these two as a unit for their foreseeable future.

 

I paid $110 for the horn & bell and $130 for the PS1.  Total investment $240.  I think they look good and I know they run good.  They’ll never climb a grade on their own but I have lots of flat, level track for them to cruise.  Win!

 

OGR PRR_Geeps_9754

OGR PRR_Geeps_9756

Attachments

Images (2)
  • OGR PRR_Geeps_9754
  • OGR PRR_Geeps_9756
Last edited by Ralph M

As far as buying something:  I just received a small box in today's mail containing about 300 tickets of various destinations for the Chicago North Shore & Milwaukee interurban system.  These are NEW--never used by the time the system quit running in January-1963.  I'm probably crazy for getting them off of Ebay--but they are fascinating to look at, especially when you're a traction buff like me !

 

Today, I continued building my custom heavy duty "bookcase" in my dining room, made out of 2 x 10 lumber and 8x8x16-inch cement blocks.  I place parallel lengths of Midwest cork roadbed and then from 56-inches to 72-inches worth of tubular track.

Each track is equipped with a Lockon, in case I want to apply power to light up cars.

I have too many locomotives and passenger cars and need a place to display them and get them out of the way.  I save the empty boxes and place them in storage!

 

I assembled my Rail-King Santa Fe A-B-B-A Alco units and put on display.  VERY, very

impressive looking.  FOUR motors, too !!  Pictures will be forthcoming soon.

Cheers.

 

KRK

I got in the Menard's Feed and Seed this morning.  Looks like I will have to change

the signs, since they did not exist in 1940 or in my modeled area today, and the truck

will have to go, also.  Will have to look at it to see if truck light wiring will transfer to

something pre-1941.  It looks nicely weathered and that will have to be matched when

a larger elevator tower is built for it.

Originally Posted by keyrouteken:

Here are a couple of photos of the custom display bookcase and my A-B-B-A Santa Fe units..   Hope you like them.  2nd B-unit has two motors, so we're talking about four motors for pulling some fourteen coaches.

 

KRK

100_0703

100_0705

A feather in your cap, "Now your talking"!

It should pull 14 all day.

Like it wasn't there.

 

It doesn't get much better than A-B-B-A's with extra motors. 

Going for a "swap in" for 5?  

 

My Gramps used 6 (experimented with 8, and I think the track got kinda hot) . I think he had 28 aluminum cars to match. 

 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×