Skip to main content

@Mallard4468 posted:

Beautiful work - will fit in nicely with a Christmas display of tinplate or postwar trains.  Nice use of (I assume) scrubbing pads for the shrubbery.  Would enjoy seeing some details regarding materials and finishing techniques.

Thanks very much. I wanted to make a few of these that were closer to O-scale in size, as most of the ones I made earlier were much smaller, similar in size to the ones made shortly before and immediately after WWII.  Construction was pretty straight forward using matt board. I took a picture of a house in the neighborhood and used that as inspiration. Working out the roof dimensions and angles was a bit of a trick, but once I got that to work, it got easier.

Basically built and painted in three pieces - the roof(s), the wall structure, and the base, completed in that order. I attached the main roof to the wall structure using some 'L' shaped strips, the porch roof with a piece of matt board across the back. Porch posts are basswood and matt board.

Windows were designed using MS Excel, then printed on vellum paper using my HP inkjet printer. I glued the roof(s) to the house, then glittered the the combination using Mod Podge and coarse glitter. When that was dry, I cemented in the windows. The vellum paper is a bit wonky when you glue it down, but it shrinks and grows taut after thirty minutes or so. It works well.

The base is made from a USPS Priority Mail corrugated box. I ship and receive a fair amount of stuff, so there's always some of that laying about. USPS corrugated is highly recommended; it's thin, yet very strong. I just cut out a section, bent tabs along the edges, than glued them down in the form of a box lid. I used another, thicker, piece of non-USPS corrugated as the form for the bottom of the house. The fence columns are cut from 1/2-inch square basswood strips topped with a piece of matt board. The hedge, as you guessed, is doubled-up scouring pads. After painting the base white, I then glued the house onto the base. I scenic'd the base using more glitter, then let the whole thing sit for a few hours to cure.

Here's a few other pics in process:

That's about it...let me know if you have any other questions. Always a fun project (although it takes forever).

PD

   Yesterday afternoon, I went to my favorite flea market.  I found this prewar tender #2689W.  This morning I opened it up to find a clean inside.  I applied a little oil and headed to the train building.  It has a strong whistle and like most this age, the motor is too noisy.  When i tried the rear coupler it worked!  Not bad for $5.00 plus tax.

Bill

2689 Wclean

Attachments

Images (2)
  • 2689 W
  • clean
Videos (1)
1940 coupler

American Flyer

Nationwide, thank you very much.  I was able to use that information to trace these poles to probably being AF 209.  I assume they are AF Wide Gauge since they are HUGE when compared to postwar Lionel telegraph poles.  I am still a little confused as there seem to be different styles of 209 poles but hopefully I can figure it out with a little more research.

@lionelflyer posted:

Nationwide, thank you very much.  I was able to use that information to trace these poles to probably being AF 209.  I assume they are AF Wide Gauge since they are HUGE when compared to postwar Lionel telegraph poles.  I am still a little confused as there seem to be different styles of 209 poles but hopefully I can figure it out with a little more research.

Yes, they appear to be a late 209 pole with double cross arms.  Some of the 209s came with only a single cross arm, but basically looked the same, possibly a bit shorter. 

Here is a photo of the single and double cross arm 209s as well the triple cross arm 210

@lionelflyer posted:

This came in a collection I bought recently (there are 6 of them).  I've never seen these before.  They are all metal and Standard or G Gauge but there are no markings on them.  Does anyone have an idea as to the manufacturer?  The cross posts are crimped to the metal pole.  They seem to be very nicely done.PXL_20230701_151746742.MP

They are American Flyer Prewar #209 made from 1928-1932 Normally Dark Red or Green.

Got this great old Lionel Standard Gauge #9E at the 8\3 auction from the good folks at Stout Auctions in Indianapolis. It is a really nice all original example and looks good on the front of these original 500 series freight cars!20230811_19194320230811_191922                                                                                                                   

Attachments

Images (1)
  • 20230811_191943

Drove down to Halethorpe yesterday morning to pick up a lot I acquired from an estate sale. A 1930's era Lionel set that's been completely repainted by the previous owner, it's probably worth about the thirty bucks I gave for it:

Estate sale IIa

My understanding is that this set was received new back in the day (a couple cars added subsequently), then refurbished by the original owner decades later, perhaps in the 1960's. It had been sitting in a nice dry attic for the last 30-40 years after the original owner's passing. Virtually zero collector value in this condition, but epic provenance.

Plan to service the locomotive, replace any missing parts (loco pilot truck, lumber stakes, brake-wheels, etc.); otherwise it'll be left as is. Someone took a lot of time to "restore" it to their taste; far from me to undo it.

It'll need a new home.

PD

Attachments

Images (1)
  • Estate sale IIa

Built a slightly modified version of Hal Carstens' "suburban station" that appeared in the April 1953 issue of Toy Trains magazine:

Suburban Station project d

Quite a few modifications (station platform base, platform roof dimensions, roof graphics, and a few others), but basically true to HC's plans. These were drawn as "cut-outs", including all of the graphics preprinted, along with decent instructions. This one has a nice narrow profile, so it will fit in a number of tight spaces around the layout.

PD

Attachments

Images (1)
  • Suburban Station project d
Last edited by pd

I picked these up the other day for $10 each for winter projects.

While not "cool" yet, I think they will be when I'm done with them.

Examples of what I've done in the past with passenger cars in similar condition; the grey & maroon passenger cars seen in the middle of this blog entry: PreWar Standard Gauge Upstairs, PreWar O Gauge Downstairs (warrenvillerailroad.com)

IMG_2375

I plan on "restoring" the caboose to an orange and blue Lionel Lines special

Attachments

Images (1)
  • IMG_2375

We soldered all of the broken tabs on the body's end-caps on the 253, then repainted with some dark green (Scalecoat #2079 BNSF Green); replaced the broken pantograph and the missing headlamps, then reinstalled all of the original trim. Polished up the frame:

Ready for another 95 years of service.

PD

Last edited by pd

Some new and some never shared until now. Also, hoping someone can help Me identify the first two!

This is a piece of American Flyer prewar track with an accessory activation clip. There’s some on eBay in standard gauge. Anyone know the product number for this?:

IMG_4982IMG_4980
The eBay listing states it’s for signal activation. Also curious as to how it worked? There’s a late prewar track piece similar to this but the “activation strip” is on the side of the  and perpendicular to itIMG_4981

got this Standard gauge Lionel observation a few years back and have had trouble finding info regarding it(although I’ve finally seen some similar ones on eBay). “The Lionel Lines” Observation. Earlier standard gauge truck. Is this a restored prewar piece, Lionel classics, Tinplate Traditions?IMG_4962

IMG_4963IMG_4964

Accidentally won this crossing, shown below, for $5 on eBay. Was surprised it was so big when it arrived, was clearly not made for o gauge.
IMG_4973

It’s a prewar Flyer wide gauge manually controlled  crossing gate. Can’t remember the product number, in kinda rough shape, missing the Flyer “plate” and some other things that had been attached to the base.

IMG_4977IMG_4978IMG_4974

Gor these a few years ago at a flea market for $5, prewar American Flyer no. 424 rubber sleepers:

IMG_4969IMG_4967IMG_4966

Last but not least- here’s a Bing interlocking station? I’ve seen this by Bing before, had some type of electrical functioning at one time but has been gutted now. Here’s the rear view

image

Uts kind of just a placeholder until I dismantle and level this part of my layout.

image

two terminals on the side for wires

image

not much but definitely some variety ha. Enjoy and help with identifying the first two items is greatly. Appreciated!

Attachments

Images (16)
  • IMG_4982
  • IMG_4980
  • IMG_4981
  • IMG_4962
  • IMG_4963
  • IMG_4964
  • IMG_4973
  • IMG_4977
  • IMG_4978
  • IMG_4974
  • IMG_4969
  • IMG_4967
  • IMG_4966
  • image
  • image
  • image

@StevefromPA- Steve I looked in my reference material at the #36 observation and it was made in various forms from 1912 to 1926  so between 98 and 111 years ago.  Your car simply looks too perfect to be that old with original paint.  In addition, of all the color schemes listed none looks like yours, the closest I could come was "...brown with green windows".  So it looks like a pre-war restoration but its beautufully done and made a very handsome car.  Great find!!  Love the Bing as well.

Best Wishes

Don

@StevefromPA - You know, as a research type person you think I would know not to stop until all sources were exhausted.  Well I got some later information on your #36 observation...The TCA reference  and the Greenberg price guide reference were not wrong, just not fully complete.  In 1924-1926 there was a MAROON smooth sided car however the lettering has some differences with yours.  For example, My reference, the Standard Gauge book by Greenberg, states that it should say..."New York Central or New York Central Lines" over the window.  In addition, it would have 500 series type 1 trucks, the most obvious visual difference is the nickel journal box covers, your trucks are (as you said) an earlier type.

Anyway, thought I would pass that along.  You may have researched all this yourself and if so I apologize for double info but I didn't want to leave anything out.

Best Wishes

Don

Last edited by Don McErlean

20231102_18255720231102_180555Pretending it is about 1927 and playing with trains on the floor. Original 380 engines with 300 and 400 passenger cars. They still running well on original track too!                                                                                                                          20231102_17091720231102_170647

Attachments

Images (4)
  • 20231102_170917
  • 20231102_170647
  • 20231102_180555
  • 20231102_182557
Last edited by GZ

A few tinplate items I picked up over the past few weeks.  First is a set of United States Toy Train Company passenger cars I purchased from one of the online train auctions.

  IMG_8426IMG_8427IMG_8428

Second is a set of tall metal signs that came in a "No. 80 Railroad Set" I picked up from a local show.  I believe these are Fergusson signs?  They even came with their original box.

IMG_8450IMG_8449

-Tom

Attachments

Images (5)
  • IMG_8426
  • IMG_8427
  • IMG_8428
  • IMG_8449
  • IMG_8450
@vettekid68 posted:

A few tinplate items I picked up over the past few weeks.  First is a set of United States Toy Train Company passenger cars I purchased from one of the online train auctions.

  IMG_8426IMG_8427IMG_8428

Second is a set of tall metal signs that came in a "No. 80 Railroad Set" I picked up from a local show.  I believe these are Fergusson signs?  They even came with their original box.

IMG_8450IMG_8449

-Tom

Are those items O or standard gauge?  The link (below) makes it sound like they're probably O, but they look big. 

@pd posted:

hmmm...I've never seen those cars before.

Nor have I.  Found this - http://www.tcawestern.org/usttc.htm

@Mallard4468 posted:

Are those items O or standard gauge?  The link (below) makes it sound like they're probably O, but they look big.

Nor have I.  Found this - http://www.tcawestern.org/usttc.htm

They are O-Gauge cars and they are definitively bigger than most of the other O-Gauge passenger cars.  I can't honestly say I had heard of U.S.T.T.C. before I bought these; I just thought they looked a little unique so I threw a bid in.  I was surprised a bit by the size when they arrived.  They seem comparable in size to Lionel 600 series passenger cars. 

-Tom

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×