replaced battery, no current in engine at all. Tried reset,nothing ,tried recover lost engine nothing, Track power is 18 volts .Using dcs system . wont work in conventional either Engine will not add to remote.
Original Post
Replies sorted oldest to newest
which item number is your engine so we can help you? the item number determines weather ps 2 or ps 3 ps 2 3 volt or 5 volt boards ok !
get back to us asap and we can help you!
Alan
p.s. it should be drawing some current on power up of mth z4000 transformer?
mth #20-2268-1 cab #4449 proto 2
This being a 5V PS/2 board, that's never a good sign. How are you seeing "no current to engine"?
Sounds like PS-2 5V board died. Seen plenty that have no response and no current draw when powered up. G
GGG posted:Sounds like PS-2 5V board died. Seen plenty that have no response and no current draw when powered up. G
And no realistic option other than replacing the 5V board set...
you can replace the five volt board with a ps2 3 volt board and will run again and then you just to have to load the sound file you need for the appropriate engine!
I can help you out if you want the board replaced!
Alan email me ok
You also need a new battery cable and a new speaker to use the 3V board. In addition, you have to undertake a somewhat delicate operation to transfer the board connector black shells to the 3V board as the connectors are not compatible.
