Controlling a TPC 400 from DCS | O Gauge Railroading On Line Forum

Chris LordOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I sat down to open this thread and what do you know but this question was asked by Gunrunner in a previous thread. https://ogrforum.com/d...nt/12834039597355094 I didn't see an answer and really want to see if anyone has one so I'm putting this in its own thread.

I run primarily Legacy (v1.5) through a TPC 400 with 2 180 watt bricks. I just acquired an MTH NS F7 DAP Executive set and wanted to try out DCS. I have a Rev L TIU hooked up in passive mode (powered by a Z-500) and the DCS works wonderfully if I start the TPC with the CAB-2. I was wondering if I could start up the TPC from the DCS so I defined it as a TMCC engine. However, I can't get it to do anything from the DCS handheld. Does anyone know if this is possible and if so what the command sequences are?

1/27/1312:28 AM

Original Post

Replies sorted oldest to newest

Dave HikelOGR Forum Member DIGITAL SUBSCRIBERFORUM SPONSOR

Hi Chris,

I gave a written explanation on the other thread, but as they say, a picture is worth a thousand words. Here's how to set it up with just TMCC or Legacy.

Here's how to set it up with both TMCC and Legacy. In this configuration you can control the TPC from a Cab-1, Cab-2, and the DCS remote.

Hope this helps.

Attachments

Hide

Images (2)

Chris LordOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Great diagram. I'm going to give it a try.

Thanks

1/27/1311:04 AM

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>