Issue with DCS seeing trains on the track.

GrometOGR Forum Member

Hey guys,

Recently I have been having an issue with my DCS setup. It's a rev. L TIU.

I go to address an engine this is on the track with my DCS remote. The engine is listed under the inactive engine list. I Choose the engine and the remote tells me the engine is not on the track. I reboot the remote, it comes back on with that engine chosen and let's me control it fine. If I go to a different engine and try to go back to the original engine, it once again tells me the engine is not on track.

This is happening with three of my Proto 2/3 engines.

Any ideas?

2/15/1310:19 PM

❤️ 0

Original Post

Dave HikelOGR Forum Member DIGITAL SUBSCRIBERFORUM SPONSOR

Hi Gromet,

You've come across one of a handle full of known bugs in the current DCS firmware. The fact that the engine won't move out the inactive list indicates either that you have a track signal problem or the engine is associated with the wrong TIU. The trick of turning the remote off and back on is a convenient work around, but as you have observed, it doesn't actually move the engine up to the active list.

2/16/132:05 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!