K Line Command in Conventional

Turn off the command signal source and the engine will start up in conventional.

I have had problems with some K-line cruise running properly in conventional.  They move slow.  G

Thanks Guys

The cruise does not really matter at this point.

I'm running a TPC 300 and as such can set my handheld to conventional track operation.

When I turn the throttle on the handheld while in conventional.....EP 5 does not move.

Do you have to have a Conv/Command switch?

Thanks

Dave

There is no Conv/CMD switch.  The board looks for command signal, if not seen it knows it is going to be in conventional.

If you have a command base on, it will see the signal.  So you need to unplug the command base from wall socket.  Just undoing the U terminal wire will not work, signal will still be present.  G

Thank You GGG

I see now how that works.

Dave