Wonder if anyone installed Kadee couplers on an Lionel Legacy F3. Would like to convert an F3A and F3B to Kadee couplers. Any suggestion and photos appreciated.
Thanks,
RAY
Original Post
Replies sorted oldest to newest
I'm sure Doug "Laidoffsick" will eventually chime in. As I recall, he did a conversion on a set.
Check out “Lowering Lionel F3s” here: https://ogrforum.com/.../lowering-lionel-f3s
PS - Where do you think Doug gets his stuff for his F3s?
Attachments
Images (3)
Videos (1)
Shapeways sells a two piece part for adding KD's to Lionel F3's. I converted mine to Weaver 2 rail drives so they sat a little lower than stock already and the shapeways part worked perfectly. I had to use the small KD boxes.
Mario, do you have a site with a list of the excellent parts you make available?
c.sam posted:Mario, do you have a site with a list of the excellent parts you make available?
https://www.shapeways.com/shops/gandyman
Figured I'd help out. I've purchased a few of Mario's parts and they work great. Highly recommended.
