I want to add a Sensor Track to my Layout. Presently I have a DB9 Connector Plugged into my Legacy Base. It feeds all my ASC'S. Hoe do I add the LCS//
Please advise,
Thanks,
Fred Standa
Original Post
Replies sorted oldest to newest
you will need to add the ser2 to the lcs system you then take your DB9 cord and plug it in to the ser2 then you can put the connector plug from the sensor tracks to the legacy base then connect the other end to the ser2 and then you will need another cord to go from the ser2 to the sensor track if you are not using the wifi unit if you want to add the wifi unit the directions with the unit will tell you how to add them as well its very easy good luck
But the bottom line is: what do I need to order to achieve this???
Fred
If you buy the VL-BB, you get that stuff "for free". 
Thanks Marty. I think I got it now. I remove my Y cord and Plug the 81499 into my LEGACY Base. The connector that I had previously plugged into the Y Cord will now plug directly into the SER2 (DB9).
John,
The only reason I did not order the VL BB is I already have the LEGACY BB. I'm perfectly Happy with that one!!! LOL
Fred
Originally Posted by Fredstrains:
John,
The only reason I did not order the VL BB is I already have the LEGACY BB. I'm perfectly Happy with that one!!! LOL
Fred
This was my first BB, so it was the way to join the BB crowd. 
The sensor track was icing on the cake, but I already had a couple of them and the SER2 and P/S. Now I have a spare.
Marty,
The Y CORD I was referring to is the one I'm using now. It goes from the LEGACY BASE, to my TMCC BASE and the third Leg to my ASC's. The connector that goes to my ASC'S will now plug directly into the SER2. RIGHT? I am taking the TMCC Base out of the Equation!!
Fred
Marty,
Thanks again. You know what they say: A PICTURE IS WORTH A THOUSAND WORDS!!!
Fred
