Skip to main content

A little background.  I had an lcs WIFI module which stopped working and was returned for a new on.  With the old module I could attach in both access point and network mode.   I received the new one and it joins access point very well.   However, it will not join my home network.  I have tried using the WPS push button method numerous times.  I then  waited for the new utility from Lionel to come out and tried connecting through the utility software with no success.  I have searched going through my router and also using another utility but have never found a gainspan signal.  Does anyone have any suggestions on how to logon through my home network.

Marty

Original Post

The Utility is a little cumbersome as I had to go through the steps as outlined in the video that is somewhere down the Chain is this Forum about three times.  I played the video a number of times to get the gist of what needed to be done.  I then played the video in a window and simultaneously had the utility open in a separate window and followed along listening to the audio while performing the steps.

I was also like you.  I know I had it hooked up as part of the network but disassembled my control board for a number of months for an expansion and just wiring cleanup and when I came back, it would only connect using the Access Point method.

Don't give up.  the utility works but be patient! and follow the video exactly.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×