Legacy remote stop communicating with base | O Gauge Railroading On Line Forum

Henry BoyerOGR Forum Member

When I turn on the power to my legacy Base unit, the train on the track powered up immediately, my remote does not respond to the locomotives unit. The engine just run, it does not respond to any of the commands . The track switches does not respond either. It was doing fine a few weeks ago. I check all the connections. The remote vibrates sometimes when I give it a respond. What is the cause of this action.

7/11/206:37 PM

Original Post

Replies sorted oldest to newest

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

It sounds more like the base isn't sending out the track signal. If the CAB2 wasn't seeing the base, you'd have an error screen asking you to search for the base.

The command base may have failed, pretty hard to say without any further information.

cjackOGR Forum Member DIGITAL SUBSCRIBER

The remote vibrates to give the operator feedback as they use it. Normal.

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

And you can push the FEEDBACK button to kill that feature.

Henry BoyerOGR Forum Member

Thanks, Somehow the common wire from lagecy base was hook up incorrectly to TI U. The remote is communicating with the base now.

Add Reply

Sign In To Reply

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>