I have a NYC GP-30 (#6-28850) locomotive which is basically dead. It had been put away for the last two years or so (moving) but brought out recently. The problem is that it is non-responsive. When placed on the track and power applied, it will go through the diesel startup sounds, but that is it. The unit will not respond to the Cab controller at all. I've run the procedures to renumber and reset it but get no reaction. So, before I send it out for repair, I thought I would ask to see if there is any sort of reset procedure, in addition to what is already in the pamphlet which came with it, which I can use to try and get it working. I've tried running it in both transformer and TMCC modes with the same result...
Thanks!!!
Joel
