Looking to see if anyone can help me with identifing a Resistor on my Lionel LCRU board #610-8042-126. The resistor that is connected to the diode near the pink power wire had burn up and I need to replace it but I can not ID the color code on the resistor since it is burned up. Can anyone send me the color code or info for the replacment resistor or a close up photo of the board to where I can get the color code of the resistor in question.
Replies sorted oldest to newest
It looks like orange, orange, gold, gold. The "gold" is only visible with a magnifier? Just looking at it it looks like brown. Under 5x it has metallic specs in it and takes on a gold sheen.
If you are talking about the resistors between the TRIACs, the one that links two triacs by itself is 200 ohms, and the ones that are 2 in series are 100 ohms each.
If you are talking about the small SMD infront of the diode that powers the logic devices, that is a 5.1 ohm device. G
It is 3.3 ohms 5%
Check the diode too. It may be bad too.
Carl
Access to this requires an OGR Forum Supporting Membership
