Looking for Run/Program Switch on K Line 2-11553 SD70MAC! Help!

Look closer at those switches, if there's a group of switches under the cover, the RUN/PGM switch is most likely there.  It's remotely possible that it's mislabeled.

https://ogrforum.com/...ne-operating-manuals

looks like someone else also said they are mis-labeled.

Thanks guys! I did see that post but I missed the part about a switch being mislabeled.

I am surprised that the operating manual is virtually impossible to find. It would be great if someone had a copy of it and could post it as a PDF

I have an old TMCC PA-1.  The Reverse unit switch doubles as Program/Run switch.  Lock/Program and Off/Run.....and it does mention that in the manual so it is not actuallty mislabelled.

You jogged my memory  MrMoe50, that was it.  FWIW, the PGM/RUN switch on any TMCC doubles as the direction lock, so you're correct, it's not really mislabeled, it's just an omission of the more important function.

GRJ,

With all you do for us folks here on the forum, I am glad I could help you.....even if it was only to help jog your memory and not really train related.��

Gary

Thanks Gary, and for the memory jog as well.

Turns out you are all very helpful!  We got it going and it is a REALLY nice engine! He got a nice engine for a great price!

Thanks to all of you for your help!

dennis

dennish posted:

Turns out you are all very helpful!  We got it going and it is a REALLY nice engine! He got a nice engine for a great price!

Thanks to all of you for your help!

 

dennis

Dennis 

I am trying to wire up the same Kline SD70MAC that you have. If possible, could you remove the hood 6 screws, to take photos of the wiring of the unit you have that runs? It would contribute so much to the knowledge bank on these Kline engines.  Noone else has anything on how these are wired.

Thank you, Rick Trinkle,  TrinkleTrains 

Rick,

I will try to get to that over the weekend. Sorry I can't get to it sooner.

Dennis

Man,

That will be a lifesaver Dennis!

Thanks, Rick