Tiffany, FYI to duplcate the black stripe with white letters above no painting is required. The whole strip is a decal. Evans Hobbycal has a white background. Its made to be used with an inkjet printer.
Simply create the text above in you favorite word processor, reverse the text and background colors and print. The printer will apply the black ink leaving the lettering white. Then cut out the strips.
Pete
Norton posted:Tiffany, FYI to duplcate the black stripe with white letters above no painting is required. The whole strip is a decal. Evans Hobbycal has a white background. Its made to be used with an inkjet printer.
Simply create the text above in you favorite word processor, reverse the text and background colors and print. The printer will apply the black ink leaving the lettering white. Then cut out the strips.
Pete
Hello Pete.....
Is it possible someone makes a foil tape with color background and "New York Central" printed on the foil strips ? Then all have to do is cut each strip and stick it on the body of the passenger car ? Like the postwar days as a preproduction foil strips ?
"Everyone who drinks this water will be thirsty again. But anyone who drinks the water I give will never be thirsty again." John 4:13-14 ERV (easy to read version)
Tiffany
Hello guys and gals
I posted pictures of the latest work done on the Hudson a day or two ago and so far NO "likes" or "comments" of any kind ? This Hudson must have been the very first early production in 1984 so it will have a lot of bugs in it just like a first model year new car being made and full of bugs in it. It has been corrected and or fixed the problems (most of it so far). When it all done, it will be a good "simple trouble free runner" like the postwar trains were of yesteryear. That is why I am going through all this trouble to see if it can be done and so far it is coming out well.
"Jesus answered, Everyone who drinks this water will be thirsty again. But anyone who drinks the water I give will never be thirsty again. The water I give people will be like a spring flowing inside them. It will bring them eternal life." John 4:13-14 ERV (easy to read version)
*Some bibles writers remove fully texted words or leave out which of course upsets me as I have to check it and correct the mistakes writers do before posting them in here. *
Tiffany
Looks great and now you have a model you can be proud of.
E-UNIT-79 posted:Looks great and now you have a model you can be proud of.
Hello E-unit-79
Thank you for your kind words 
. I am half way done and probably will paint the engine, tender in April. I wondered who make the best LED type bulb (bayonet base) for the Williams aluminum cars ?
"Then Mary said, 'I praise the Lord with all my heart. I am very happy because God is my Savior." Luke 1:46-47 ERV (Easy to Read Version)
Tiffany
Hi Tiffany: I answered this on the Lionel/Williams passenger car question, but I'll repeat it here- Town and Country Hobbies have bayonet and screw base bulbs in bright white, warm white (matches postwar Lionel), and red & green, they are available singly and in packs of 50. I can't remember the price. I use them and have no complaints, and will be buying more at York next month. Buy a couple just to see if you like them.
artyoung posted:Hi Tiffany: I answered this on the Lionel/Williams passenger car question, but I'll repeat it here- Town and Country Hobbies have bayonet and screw base bulbs in bright white, warm white (matches postwar Lionel), and red & green, they are available singly and in packs of 50. I can't remember the price. I use them and have no complaints, and will be buying more at York next month. Buy a couple just to see if you like them.
Hello artyoung
Can you give me the link or web address, thanks. (Up-date) never mind, found the link thanks again
"Christ had no sin, but God made him become sin so that in Christ we could be made right with God." 2 Corinthians 5:21ERV (Easy to Read Version)
Tiffany
Hello guys and gals........
I will post more pictures of the Pittman motor and Dallee E-unit and wiring installation soon as I been really busy this week. Does anyone have a working Williams smoke unit with the board you like to get rid of as I would like to put it in my Hudson and do the fitting before painting. I like mild smoking not heavy like the fan driven types as heavy smoking affects my breathing due to heavy asthma I have so must use machine for asthma attacks so fan driven smoke units are out. This engine has 77.4 inch drivers so like to run it kind of fast 80 or so scale miles per hour like the real one does with the 6 car aluminum passenger set. I will be getting a 11.5 to 1 ratio gearbox from NWSL soon but will use the one that came with the engine for now and Pittman motor speed is about 6400 RPM's @12 volts.
"And now my head shall be lifted up above my enemies all around me: Therefore I will offer sacrifices of my joy in His tabernacle; I will sing, yes. I will sing praises to the Lord. Psalm 27:6 NKJV (New King James Version).
Tiffany
Hello guys and gals.
It been almost a long 2 weeks , almost busy everyday whew !!!!!!!! I been working very hard on this Hudson ( hardest part is stripping the tough 33 year old paint off) and got sick from the fumes of the stripper in last few days. The paint stripper is very toxic and expensive too. I had to buy 2 cans worth at total of 16 dollars and change but hope to never ever use this nasty stuff again and it did a very good job results. I installed the Dallee board and Pittman motor , did the wiring work adding the fire box LED flickering light in orange color (Way cool !!!) and very bright 5MM LED for headlight ! Since the Williams passenger cars are Lionel copies so I added on a water scoop under the tender just like the Postwar streamliner tenders have. It really looks good on this brass tender. This engine really looks old school. I am still working on the air compressors for this engine and other works still need to be done before painting. The painting will be done as the weather permits as its suppose to rain pretty much this week so will have to wait until next week hopefully. I purchased 10 feet of Lionel "super flex" wire and 18 volt LED bayonet base bulbs for the 6 aluminum passenger cars ( Did the Vista Dome car last week with flex wire and LED bulbs) will take photos of the cars soon. It will be a very nice "postwar" style " train. Here are in the photos folks...
Whoever has no rule over his own spirit
Is like a city broken down,
without walls.
Proverbs 25:28 NKJV (New King James Version)
Terrific progress on your Hudson! With regards to the smoke unit, the Hudson originally came with a Seuthe smoke unit. I have 2 engines that use these units. They produce a lower volume of smoke that is not as offensive and may be what you are looking for. My big piece of advice however is to only use the smoke fluid that is recommended for these units. The usual smoke fluids burn too hot and will burn out the unit (I found that out the hard way!). Other retailers may offer these units and fluid, but I purchased mine from DCC Trains. Here is a link for both the replacement units and fluid:
http://www.dcctrain.com/shop/s...ds&search=seuthe
Best of luck in your project - it looks great and nice work!
I follow this thread with interest. It is looking very good until now!
Regards
Fred
rjsmithindy posted:Terrific progress on your Hudson! With regards to the smoke unit, the Hudson originally came with a Seuthe smoke unit. I have 2 engines that use these units. They produce a lower volume of smoke that is not as offensive and may be what you are looking for. My big piece of advice however is to only use the smoke fluid that is recommended for these units. The usual smoke fluids burn too hot and will burn out the unit (I found that out the hard way!). Other retailers may offer these units and fluid, but I purchased mine from DCC Trains. Here is a link for both the replacement units and fluid:
http://www.dcctrain.com/shop/s...ds&search=seuthe
Best of luck in your project - it looks great and nice work!
Hello rjsmithindy
Thank you for your kind words, it has made my day today ! I have 2 more things that needed to be done before painting which is #1, adding boiler weight to the front of the engine to "balance the engine" so that the front first driver will have same amount of weight as the rear third driver for better tracking over the switches and crossings as right now the engine is "rear" heavy ,"light" front. And # 2, make mounts for the 2 cast metal air compressors from Bowser as this Hudson didn't come with those. Thank you for the link of the smoke unit as it is just what I been looking for.
"And it shall be, that just as the Lord rejoice over you to do you good and multiply you, so the Lord will rejoice over you to destroy you and bring you to nothing: and you shall be plucked from off the land which you go to possess. Deuteronomy 28:63 NKJV (New King James Version)
Tiffany
sncf231e posted:I follow this thread with interest. It is looking very good until now!
Regards
Fred
Hello Fred.....
Thank you for your kind words, it helps I wonder how to paint the inside of the cab and is not removable using the rattle can spray paint ?
The screen for the gate of the court was woven of blue, purple and scarlet thread and of fine woven linen. The length was twenty cubits, and the height along its width was five cubits corresponding to the hangings of the court. Exodus 38:18 NKJV (New King James Version)
Tiffany
Hi Tiffany,
That's nice work.
Do follow rjsmithindy's advice on the smoke fluid. It is somewhat thinner than water. And check for this. Was there a board connected to the smoke unit? The ones we used at Right of Way had to be run on 5 volts.
As far as the cab goes you could use swabs and lacquer thinner but it still would be a lot of work.
Looking forward (as you are I'm sure) to seeing the finished product.
Lou N
Hello guys and gals.......
I am still working on the cylinder and air compressors (painting) and will soon post the pictures as the weather has been crazy but waiting for the right conditions for painting so hang on guys... I am not finish yet but refuse to give up !!
"Blessed is the man who fears the Lord, Who delights greatly in His commandments". Psalms 112:1NKJV (New King James Version)
Tiffany
OK, OK Tiffany, I will personally stop the Maui Express Storms from heading your way. Looks great. Don
rjsmithindy posted:Terrific progress on your Hudson! With regards to the smoke unit, the Hudson originally came with a Seuthe smoke unit. I have 2 engines that use these units. They produce a lower volume of smoke that is not as offensive and may be what you are looking for. My big piece of advice however is to only use the smoke fluid that is recommended for these units. The usual smoke fluids burn too hot and will burn out the unit (I found that out the hard way!). Other retailers may offer these units and fluid, but I purchased mine from DCC Trains. Here is a link for both the replacement units and fluid:
http://www.dcctrain.com/shop/s...ds&search=seuthe
Best of luck in your project - it looks great and nice work!
Hello rjsmithindy
I am interesting putting one in but not sure in how to control the voltage to not go over the 10/14 volt range. Is there a board to control the voltage to 12 volts max. to the smoke unit ? I t may require the voltage up to 14 volts to get the train up to speed to say about 60 to 80 scale MPH ( passenger train speed) ? Any ideas as I do want to put the Seuthe unit # 6 (10/14 volt AC/DC) model in this Hudson.
Thank you for your kind words sir !
Tiffany
Hi Tiffany, the engine originally came with a seuthe unit in the smoke stack. If the engine was hardly run (as I seem to recall earlier in the post), you may want to just purchase the fluid for now and test the original unit. Otherwise, if a new one is preferred or needed, I would consult with the retailer for the best unit to purchase. I did the same several years ago, and they were able to direct me to the best purchase. Unfortunately I am unable to locate any receipts, etc., or I would share which I had purchased.
rjsmithindy posted:Hi Tiffany, the engine originally came with a seuthe unit in the smoke stack. If the engine was hardly run (as I seem to recall earlier in the post), you may want to just purchase the fluid for now and test the original unit. Otherwise, if a new one is preferred or needed, I would consult with the retailer for the best unit to purchase. I did the same several years ago, and they were able to direct me to the best purchase. Unfortunately I am unable to locate any receipts, etc., or I would share which I had purchased.
Hello rjsmithindy
When I received the engine , it didn't have headlight bulb or smoke unit not even a boiler weight but just a reverse unit in the tender and motor , gearbox in the engine that's it. It was pretty much bare bones !!!!!!! I think it must have been a very early first production run. The smoke stack hole on top of the boiler is big enough for Seuthe smoke unit so that is good news (no cutting required) !!
"My son, keep your father's command, and do not forsake the law of your mother. Bind them continually upon your heart; Tie them around your neck. Proverbs 7:20-21 NKJV (New King James Version)
Tiffany
Rob, the engine was never run, not one inch. It just didn't run out of the box. Not sure if it had a smoke unit. What it did do as Tiffany found out is fall apart. They made a second run of these engines that were much better. Tiffany, I think I have a weight out of an old Lionel engine if you still need one I will send it. Don
scale rail posted:Rob, the engine was never run, not one inch. It just didn't run out of the box. Not sure if it had a smoke unit. What it did do as Tiffany found out is fall apart. They made a second run of these engines that were much better. Tiffany, I think I have a weight out of an old Lionel engine if you still need one I will send it. Don
Aloha Don !!!!!!!!
That would be nice but if it cost 45 dollars to ship it then its better to NOT ship it. I never thought it would cost such a arm and leg to ship from Hawaii !!! If it is CHEAP to ship it then thank you as I can use the weight for this Hudson. This time the Hudson is no longer falling apart so far so good.
Thank you, Don
Tiffany
Hello guys and gals.......
Oh boy its been a very busy weekend and first day of the week. I have done some more work on the Hudson such as installing the LED's for the trail end roof of the Williams Observation car and adding brass washers as a spacers (6 per side) between the siderods and the main rod. I think it looks better as to fill in the huge gap between them. The boiler screw is tiny bit too short as if its loosen by a half a turn then the whole chassis will fall out so I got some 4-40 by 1 1/4 inch long machine screws and retapped the hole to 4-40 size (extra longer screw won't hurt). The original screw is 1 inch long, better safe than sorry to have to pick up the broken chassis from the floor. I thought of a idea to use a short piece of PCV pipe and fill it with fishing weights to get a few OZ of weight as a boiler weight ( I haven't gotten the fishing weights yet). And finally made a brass "U" bracket for the cast metal air compressors from Bowser for the front of the engine and spray primer then paint, it came out pretty good. I had to drill and tap 2-56 machine screws to mount it on the frame. Its almost done then body painting is next as the weather permits (again) so here are the photos........
"He who justifies the wicked. and he who condemns the just, Both of them alike are an abomination to the Lord. Proverbs 17:15 NKJV (New King James Version)
Tiffany
Hello guys and gals.....
I sprayed primer the bodies today and the results is really better than I expected !!! In few days I will spray paint the silver on. I made a 8 OZ weight using 2- 4 OZ cannon ball lead weights and epoxy it in the short section of the PCV tube to make into a boiler weight for the front of the engine. I ordered 20 feet of super flex wire for the roller pick ups of the passenger cars. I cut out 2 pieces of gray plastic to put the "Burlington Route" decals on that I ordered from Dave of LBR last night as it is in custom size (smaller one for the nose of the engine and larger one for the back door of the observation car). I should be finishing the Hudson this month as there is not much left to do for it. Here are the pictures guys !!!
Now it was not written for his sake alone that it was imputed to him, but also for us. It shall be imputed to us who believe in Him who raise up Jesus our Lord from the dead. Romans 5:23-24 NKJV
Tiffany
Hello guys and gals......
I wondered who makes "glass" flat lens in .290 Dia. by .0625 thick ? I need one to put in this Williams Hudson's headlight. The headlight lens that came with the Hudson is plastic and is poorly made and has glue on it, its messed up. Any ideas guys ?
Jesus said ( In red words) "Now if God so clothes the grass of the field, which today is , and tomorrow is thrown into the oven, will He not much more clothe you, O you little of faith? Matthew 6:30 NKJV
Tiffany
Hello guys and gals..........
No luck in the glass lens ? Oh well. Today is a beautiful day for painting so decided to paint the engine body and boy it turn out well and it showed lots of metallic sparkles in the sun as its drying ! I drilled mounting holes on the tender body front and back and made "L" brackets for it to mount the tender body to the tender frame. I also made a ground tab to install a high pinched whistle sound ( I hope its LOUD enough) from Dallee as one wire is for the ground and other for the pick-ups. I haven't gotten the sound unit and roller pick ups for the tender yet as will purchase those items in June. I will paint the tender body tomorrow. After the tender body is painted, then the gloss clear coat for the decals after that the final gloss clear top coat in few days. I didn't take any more pictures of the passenger cars as all I did was changed to bayonet base LED's bulbs so that nothing. Here are the pictures guys.
Surely someone in this forums can help with the lens ? Glass, flat .290 Dia. by .0625 thick for headlight on this Hudson, anyone ?
(up-date 5/15/17) Another beautiful day to paint the tender body so it was done about hour ago, check out 8 new pictures of the tender body. I am still waiting for the decals from Dave of LBR. He said that he will ship the custom size "Burlington Route" decals by Thursday this week. That will give more time for the bodies to be totally dry by then. Guys, I know this Dreyfuss Hudson belongs to NYC but there are many of those engines models from other makes that look better than this lowly Hudson. This engine has no chance to complete with the other makes so decided (few months ago) to paint it in Burlington colors because it is simple and make it a "one of a kind" engine for this Burlington road name. This Williams lowly Hudson does have looks from the postwar era. and pulling postwar style Williams aluminum passenger cars as they really look good together almost like a matched streamline style set that is so "why not" make it different or special ! I am still looking for glass lens for the Hudson.
(up-date 5/16/17) I decided to put the bodies on the frames to see what it looks like and wow it blew me away !! few hours later, decided to hand paint the handrails , ladder on the engine and tender semi-gloss black and this is the first coat for the evening. Tomorrow I will paint the second coat on handrails, check out 13 last pictures of this evening. My goodness time flies when having fun and surely worn me out !!
Imitate me, just as I also imitate Christ. 1 Corinthians 11:1 NKJV
Tiffany
Hello guys and gals..........
I just added 13 new pictures of the Hudson this late evening ( did some black painting on handrails, ladder) putting the bodies on the frames to see what it looks like. The pictures are posted on yesterday's post. The Hudson will soon be ready for the lens but I don't know where to find one a glass one and a smaller MV red lens for the tender's rear back up light.
" But motioning to them with his hand to keep silent, he declared to them how the Lord had bought him out of prison. And he said, "Go tell these things to James and to the brethren." And he departed and went to another place. Acts 13:17 NKJV
Tiffany
The Hudson is looking very good!
I do not know where to find lenses, but you might take a look here (if you did not already do this):
https://ogrforum.com/t...for-headlight-lenses
Regards
Fred
sncf231e posted:The Hudson is looking very good!
I do not know where to find lenses, but you might take a look here (if you did not already do this):
https://ogrforum.com/t...for-headlight-lenses
Regards
Fred
Hello Fred....
Thank you sir for your kind commets The engine is almost finish just add decals, clear coat , sound system from Dallee (hopefully loud enough), roller pick ups for the tender and smoke unit in June. Then in July, MTH engineer / fireman figures with seat and better gearbox from NWSL , paint the driver centers silver with black rims, LED's headlight, MV "red" len for the back up in tender's headlight. and finally glass lens for the engine if sooner.
Blessed be the Lord God of our fathers, who has put such a thing as this in the king's heart, to beautify the house of the Lord which is in Jerusalem. Ezra 8:27 NKJV
Tiffany
Hello guys and gals, Fred..
Well today I looked in my tool chest and found a optical lens from scanner that we (my husband and I) took apart few years ago saving machine screws and small washers. The glass optical lens is in very close size to the plastic lens that was glued to the headlight housing of the Hudson and was removed for priming/painting. I got lucky because our Lord helped me (He told me where to find it), it is very close in size I needed and just trimming of the paint using X-Acto knife from the inside of the headlight housing lips. I test fitted it to see what it looks like and will fit right in (after I spray clear top coat is done then trim to fit) , My goodness !!! 
Here are the pictures guys.........
Behold, the Lord makes the earth empty and makes it waste, Distorts its surface And scatters abroad its inhabitants. Isaiah 24:1 NKJV
Tiffany
Hello guys and gals.........
I decided to do some more work on the Blackhawk Hudson's tender today. I cut a brass tubing short section with a red jewel of the same size at one end as the tender's back up light and epoxy the 2 pieces together and put it on the chuck of the power drill to round it a bit and smooth out the rough edges using fine sand paper. The red jewel and brass tube section slips INSIDE the back up light opening of the rear of the tender very nicely. I did some silver paint touch ups on the handrail posts of the engine, black paint touch ups rear ladder of the tender too. I received the "Burlington Route" decals from Dave of LBR yesterday. The decals are of custom sizes thus smaller ones for the front of the engine and larger ones for the door of the tail end of the observation car. I found out it best for the temp to be in low 70's for good spraying of paint or clear coating but at this hour 4:18 PM PST, it is in upper 90's so I will have to get up bit early tomorrow morning to spray the clear coat on areas where the decals will be placed on while its bit cooler in low 70's before it get too hot in afternoon. When the decaling work is done then next is to spray final clear coat over the whole engine and tender bodies then finally time to glue or epoxy the lens in its place. That would be all for the rest of this month until in June. In June I will purchase smoke unit , sound unit from Dallee (HOPE it is LOUD enough) and roller pick ups assemblies from WBB for the tender. In July, new NWSL gearbox, front flywheel and pair of engineer/ fireman figures already seated from MTH, paint the driver centers silver with black rims and probably be finish in July. Guys, I don't know why the C.B.& Q railroad call this train "Blackhawk" when the whole train is painted in silver when it should be called "Silverhawk" instead ? I will post pictures in hour or so today.
He who does not put out his money at usury, Nor does he take a bribe against the innocent. He who does these things shall never be moved. Psalm 15:5 NKJV
Tiffany
Hello guys and gals.......
I just weighted the Blackhawk Hudson with the 8 OZ lead weight and no front and rear trucks and with the body, its weight is 4.538 pounds on a digital scale without the tender. Is this kind of light for a 3 rail Hudson type locomotive ? What does a die-cast Hudson weight such as a lionel 773 and others ? I know that the heavier the engine, more wear and tear on the drive train and the flanges as well.
All flesh would perish together, And man would return to dust. Job 34:15 NKJV
Tiffany
Hello guys and gals.
No one knows the weight of the die-cast lionel Hudson # 773 and other brand's Hudson ?
Another man dies in the bitterness of his soul, Never having eaten with pleasure. Job 21:25 NKJV
Tiffany
FWIW I have a lot of Hudsons but only postal scales and a bathroom scale. Neither useful in the 5-8 lb range. I suspect unless someone here works in a Deli or supermarket and also owns Hudson would they be able to help.
Pete
Norton posted:FWIW I have a lot of Hudsons but only postal scales and a bathroom scale. Neither useful in the 5-8 lb range. I suspect unless someone here works in a Deli or supermarket and also owns Hudson would they be able to help.
Pete
hello Pete..........
Well it doesn't matter anyway as this Blackhawk Hudson has 4 traction tires and they are in good shape for its 33 year old age (no dry rot) !! . I have weight "balanced" the engine (equal weight on front 1st driver and rear 3rd driver) and there is about 2.269 pounds on each of the 2 driver axles as the middle driver is barely touching the top of the rails. The total locomotive weight without front pony truck and rear trailing truck is 4.538 pounds (chassis and body) with 8 OZ lead weight. It should have no trouble at all pulling 6 Williams 15 inch aluminum passenger cars on 072 track. I am looking for a extra Williams "coach" 15 inch aluminum passenger car in "Burlington " road name, does anyone have one for sale new in the box ? Since the Hudson is light which is ok and easy for me to handle it when taking it out of the box and putting it on the track. I just thought it should weigh more to area of like 6 pounds and up.
I raise up some of your sons as prophets, And some of your young men as Nazirites. Is it not so, O you children of Israel?" Says the Lord. Amos 2:11 NKJV
Tiffany
I did some work this past weeknd and I added pick up axle wriper springs for the "ground" pick up. Later this week , will order a pair of roller pick ups for the tender as it never came with them. And will be ordering a Willliams steam sound unit "True blast 2" ,lot cheaper than the better steam sounds unit from Dallee but good enough for me. I painted the tail end skirt of the observation car's fake coupler black as the rest of the couplers of the train is black so why not. I put on "Burlington route" decals, Large logo decal on the tail end back door of the Observation car and smaller logo decal on 8MM by 12 MM sheet aluminum for the decal to be placed on but first had to slighty bend the small sheet of aluminum to fit on curved nose of the front end of the engine. I will be getting more clear coat spray can later this week then do more decaling on the engine and tender. Only four more things to be done to go, 1) Seuthe smoke unit, 2) a pair of engineer/ fireman figures with seats from MTH, 3) up grade gearbox and flywheel/shaft coupling from NWSL and finally 4) paint the drivers centers silver with black tires and silver bearing caps on the tender/ trailing trucks. For now here are the pictures of the work that was done few days ago.
All who hate me whipser together againist me; Againsit me they devise my hurt. Psalm 41:7 NKJV
Tiffany
Really looking great ! Your patience and attention to doing it all correctly, the results speak for themselves......
Jesse TCA 12-68275
texastrain posted:Really looking great ! Your patience and attention to doing it all correctly, the results speak for themselves......
Jesse TCA 12-68275
Hello texastrain
Thank you for your very kind words !! 
. That really means a lot to me . I think this is "one of a kind" train as we OGR members know that C.B.&Q never had "Dreyfuss" Hudsons so it's "one of kind" (dared to be different).
The best of them is like a brier, The most upright is sharper than a thorn hedge; The day of your watchman and your punishment comes; Now shall be their perplexity. Micah 7:4 NKJV
Tiffany
Hello guys and gals
I have a problem well a big problem that is. Last night about 2 am in morning it was about nearly 80 degrees outside so I decided to do some clear coat touch ups on the areas that I missed just prior to putting on decals. I ruined it as the clear coat spray made some "runs" stags on the body on some areas after almost 4 months of hard work and its still not finished SIGH !!! It was going to be above 100 degrees all this week starting today. I am really discouraged about it and not wishing to strip it all down and start over due to the flumes and cost of the paints and paint strippers. I don't know what I will do now..... I guess I can purchase the Lionel Commodore Vanderbilt Hudson # 18045 or others to pull the Williams 15 inch aluminum cars as I think the cars would look good behind the CV Hudson and rename the cars to "New York Central" but after checking e-bay for them and found sellers are asking for more than I can afford to pay. Would this Lionel CV Hudson be good choice for this train, I am trying to create (Postwar style streamliner passenger train) ? SIGH !!!!!!!!!! Last Friday that my brother passed away at 75 from heart attack and was dead for 8 days before the apt maintenance man found him lying on floor in his apt as the L.A. County sheriffs dept. called us last Friday. My brother lived at this apt for 20 years.
In that day the Lord of hosts will be For a crown of glory and a diadem of beauty To remnant of His people, For a spirit of justice to him who sits in judgement, And for strength to those turn back the battle at the gate. Isaiah 28:5-6 NKJV
very discouraged, Tiffany
Tiffany, I'm sorry to hear about your brother. Many years ago I went through the same with my sister.
Now Tiffany, this doesn't sound like you. GIVING UP!!!! You owe it to the old gal to finish her. It's just a set back. Remember, I gave you that engine (less $13.50) so you must finish her. You've done so much fine work on it and made her beautiful. Take a couple of days off, rest and do the right thing by her. You'll be glad you did. Don
scale rail posted:Tiffany, I'm sorry to hear about your brother. Many years ago I went through the same with my sister.
Now Tiffany, this doesn't sound like you. GIVING UP!!!! You owe it to the old gal to finish her. It's just a set back. Remember, I gave you that engine (less $13.50) so you must finish her. You've done so much fine work on it and made her beautiful. Take a couple of days off, rest and do the right thing by her. You'll be glad you did. Don
Hello Don.
I have been thinking this evening about how to fix the problem and I might have found a way to fix it. I think I can"lightly" sand the affected areas (about 1/4 inch long) and recoat it as I just have to deal with 3 affected spots. I think it will turn out ok after thinking about it for while. I will try to take pictures of "before and after" affected areas. If it turns out great then I will be glad to finish it !!! I just need to replace the gearbox with the better NWSL gearbox and pair of engineer/ fireman figures with seats, paint the driver centers silver then its finished. I really didn't give up but of course it was a set back and felt like giving up though. I just LOVED that shining silver Hudson. I do want to finish that old lady. My brother and I never gotten along as he was a bully to me and a expert in guns too. I am just glad its over. When the police filed the death report and send me a copy list of his items by e-mail, his guns were missing !!!
Don , thank you for your kind words, it really helped !!!
"Now therefore, listen to me, my children For blessed are those who keep my ways.(means keeping the 10 commandments) Proverbs 8:32 NKJV
Tiffany
Access to this requires an OGR Forum Supporting Membership
