Looking XTrkCad parameter files for RealTrax O-31 Right Hand Switch

SleeperOGR Forum Member

Hi I’ve been searching for a MTH RealTrax O-31 Right Hand Switch Track parameter file to add a siding to my O-scale layout without much luck. I have everything needed for FastTrack, but unfortunately the dimensions are not even close.

I’m not sure if anybody here uses XTrkCad and I could make my own parameter file, but I would have to first buy the switch to get all the dimensions. The whole reason I want to draw it out first is because I have a slight angle in the way the layout sets against the wall that may interfere with my plans.

1/10/158:43 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Susan DeatsOGR Forum Member SUPPORTING MEMBER

This is from RR-Track v5 Properties for the RealTrax 031 RH turnout. It might help.

Attachments

Hide

Images (1)

1/11/151:00 PM

❤️ 1

SleeperOGR Forum Member

Originally Posted by Susan Deats:

This is from RR-Track v5 Properties for the RealTrax 031 RH turnout. It might help.

WOW! Thank you very, very much Susan. I pretty much had given up and thinking about just buying the thing.

1/11/151:05 PM

❤️ 0

SleeperOGR Forum Member

Well it wasn’t quite enough information for XtrackCad. I need the offset from the center end of the curve perpendicular to the straight section if it were extended to the curve end. I don't know if that makes sense but here is a screen shot.