Is there a way to test the motor driver board .. I got a legacy engine engine that wont move .. I tried a factory reset and it did nothing.
Replies sorted oldest to newest
It's probably a little early to try stand-alone tests. How about a full description with the Lionel stock number, etc. Also, exactly what are the symptoms, what works, what doesn't work?
Did you try the reset from the manual?
Not really unless you understand some of the FETs and how they are tested. Normally you swap in a new board to see if that resolves the issue. G
Never mind it was a bad ground and the scensor on the motor ..
More often than not, it will be your Odyssey encoder board on the motor than the motor driver board. You did good, It is always helpful to many when you post the cause of a problem. It is frustrating when someone asks for help with a problem and never posts the end result.