Thinking of converting a MTH PRR Centipede (20-2200-1) to ERR DC Cruise. Can both smoke units be hooked up to the ERR board? Also, what sound set would be the most appropriate file to use for a Centipede as ERR doesn't really have one.
Original Post
Replies sorted oldest to newest
You'll need to use a relay to handle the current of two smoke units, the R4LC triac would probably cook with the load.
gunrunnerjohn posted:You'll need to use a relay to handle the current of two smoke units, the R4LC triac would probably cook with the load.
Had a feeling I'd need something like that. What voltage/amperage relay should I use? Anything else I'd need for the smoke or just the relay? I'd just wire in the relay and then tie both smoke units to the board? Am I in the right direction?
For sound, the ERR "Alco PA" sound set is the closest match. It is a realatively low rpm prime mover with a single-chime horn like the Baldwin Centipede.
Bob posted:For sound, the ERR "Alco PA" sound set is the closest match. It is a realatively low rpm prime mover with a single-chime horn like the Baldwin Centipede.
Thank you.
