It took a while, but is doable. Makes for quite a show,
Marty
Attachments
Images (2)
Original Post
Replies sorted oldest to newest
Did you modify an existing front. Or buy the already lit and wired front from portlines.
I popped out head lite lens and had to drill two holes for the marker lites, On the inside of the boiler are two casting marks that I used for a guide for drilling the holes. That way I had a good shot of them being pretty even., This engine is equipped with TMCC, runs like a prince on ice...I added two rear pul mor wheels and changed out the armature for the proper one...
Marty
It looks great Marty.
