Skip to main content

5 replies

NEW YORK CENTRAL LEGACY Pacemaker Help

PeytonM97PeytonM97OGR Forum Member

Hello everyone! I unboxed my new legacy pacemaker today and I ran into a problem I hope will be an easy fix. Ok so I made a layout using the CW-80 power supply and fired up my universal Bluetooth remote and it started up great. So the engine doesn’t want to go forward. It try’s and stops and blows the whistle so it’s try’s again and failed so I used my iPhone and tried it that way same thing. But the odd part is the engine goes in reverse just fine. So I tried the CW80 and it goes forward and backwards just fine. So I’m confused here? Any suggestions?

Original Post

Replies sorted oldest to newest

PeytonM97PeytonM97OGR Forum Member
@tom21pa posted:

It could just be an issue running if via  Bluetooth.  Might be fine under legacy control.  But if you don't have legacy then your stuck.  Call Lionel or return it.  I personally hate sending stuff to them to repair, usually comes back damaged somehow.

I just email them about it. Here’s the thing my other legacy steam Loco runs just fine on Bluetooth I haven’t had any problems with that one.

T tom21paOGR Forum Member
@PeytonM97 posted:

I just email them about it. Here’s the thing my other legacy steam Loco runs just fine on Bluetooth I haven’t had any problems with that one.

Yea,  its Lionel, they dont have quality control.  Older Bluetooth locomotive may be fine.  They might just need to reprogram your new engine. Obviously its not just you having problems, just like the YouTube video

Add Reply

Views: 191
Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×