Yesterday while showing the trains to family a <P> symbol appeared on the top line of my handheld. I believe it happened after the remote brushed my sweater. Trains still run fine, but I am unable to remove and do not know what it is for. I scanned my copy of the DCS Companion, 3rd Edition but could not find an answer.
Any assistance will be appreciated.
Replies sorted oldest to newest
Bill,
I scanned my copy of the DCS Companion, 3rd Edition but could not find an answer.
The answer is in the book - for sure! 
It sounds as if you may have triggered a Playback session, as described on page 52 of The DCS Companion 3rd Edition:
RECORD/ PLAYBACK:
To play back a session, first ensure that all engines that participate in the session are in their initial starting positions, and that all switch tracks are properly oriented
• Navigate to the RECORD/PLAYBACK menu and press soft key S4 ( PLY) to play back a session. The available sessions are displayed
• Use the thumbwheel to scroll to one of the Session Names and press the thumbwheel to select the session for playback
• The Engine Control Screen is displayed with a (P) to the right to indicate that a session is being played back
• The session plays back as it was recorded
• To play back a session continuously, instead of pressing soft key S4 (PLY) press soft key S5 (LOP) for looped playback
• When the session is completed, or when you desire to end the session, return to the RECORD/PLAYBACK Control Screen and press soft key S2 (STP) to stop the playback
 | This and a whole lot more is all in “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at OGR’s web store! |
You were correct. Now back to normal.
Thanks for the assistance.
Access to this requires an OGR Forum Supporting Membership
