Those slag dumps can look nasty at night with the red light. That would be impressive to model.
Would love to hear how you plan to model that George
@Ohio Jeff posted:Would love to hear how you plan to model that George
So would I!
I've got some ideas that I want to work on before talking more about this. Right now, it's a concept that needs proving. I'm optimistic, but it's not a done deal yet.
George
Updated 10/6/2024:
- Early attempts to de-bond roof sections and reuse them in the new fortified Open Hearth roof have so far been unsuccessful. I'm still chewing on this one, but I might have to replace all these roof sections ($$$$ ).
- I am now thinking about the woodworking aspect of my slag dump. I am going to cut and size a 4' x 8' x 1/4" Masonite sheet to make the base of the slag dump. We're doing a lot of test-fitting and mock-ups to see how all the pieces will end up, and how I will support it all. The dump is going to be permanently installed on the layout, but the Arduino and other animation circuitry will sit on a small (6" x 12") base that must be removable. It's not going to pop in and out on a daily basis, but some thought must be given to access to smoke units and to powering the board. All of this will affect the placement of components.
- The layout and train room underwent a thorough cleaning and organizing effort over the previous few days.
- A family friend and his wife flew in to visit and stayed overnight with us last Thursday. He was amazed at the progress in just one year. It was fun watching him run trains – real kid on Christmas morning stuff. His wife loved the layout scavenger hunt. Even though it’s not done, I’m enjoying the layout and the effect it has on visitors.
- I am ecstatic to report that the layout performed very well. Not only did engines crawl along without stalling, but the 18” passenger cars on the Spirit of St. Louis were able to back down the mainline at moderate speeds!
- I did have 2 TMCC-related minor emergencies. In nearly the same spot, two different engines failed to respond to the DIR button in a timely fashion. One situation prompted the use of Emergency Halt. In the other, I simply grabbed the Decapod off the track, averting a Red Arrow type of event. As a result of that "excitement" and taking into account future view blocks will hinder the detection of emergencies, I have decided to install 3-4 emergency Halt panic buttons around the layout. These will be hardwired to the terminal strip that controls power to the layout. My electrician friend has volunteered to construct them. The Emergency Halt button on the CAB-1 remote is the first line of defense. These buttons will be the second.
- A new circuit (ITAD-like) has been acquired GRJ (thank you @gunrunnerjohn). I hope to install it (to run a PRR signal) very soon (before York).
- I have gone back to work at Hobby Express 2 days a week.
- And finally, I am getting ready to attend the World's Greatest Train Meet next week.
More when I know it.
George
It’s great your visitors liked the layout, running trains, and scavenging! It was nice to see you at Hobby Express a couple weeks ago!
@Mark Boyce posted:It’s great your visitors liked the layout, running trains, and scavenging! It was nice to see you at Hobby Express a couple weeks ago!
Thank you!
Updated 10/29/2024:
It's been an unusual couple of weeks since York. And York itself was very different for me. I actually spent very little this time around, coming home with a refurbished postwar LW transformer (for the programming & test bed) and a few laser cut benches. Just didn't see much I wanted to buy. Still had a great time and saw a bunch of friends.
Layout work is slowly ramping up in intensity:
- Got a nice day last week and spray painted the new roof underlayment panels flat black. That pretty much finished off all the cans of Rustoleum 2X flat black primer. The one that is left is clogged. I have it upside down soaking in some paint thinner in the garage.
- I have temporarily clamped one of the underlayment sheets to the top of the roof trusses. It's painted side up because I am planning to add stiffeners (in an "X" pattern) between the trusses. I'm going to glue them in place and then flip the piece over and permanently glue it into place. After that, I will glue corrugated roof pieces (Plastruct 91512) into place on it. Of course, my order of Plastruct 91512 has to arrive at Hobby Express first.
- My 2-sided divider backdrops have been finalized and are headed into production. There's a chance they will arrive next week, which will pretty much force me to move forward.
More when I know it.
George
Can't wait to see some photos of the backdrop! It'll be like getting another new track section.
Oh, forgot to post this photo of the OH roof being temporarily held in place.
Stiffeners will go in place over the next few days.
George