Skip to main content

3 replies

PS2 5v to PS32 board and new WTIU

P paultOGR Forum Member

Forgive me if this is in the wrong place or mentioned before, I tried searching but couldnt find exactly what I was looking for...



I have a PS2 5V Rail King Southern Crescent steamer and the board is flaky from what the fine folks over and Hennings have said. It KINDA responds to their TIU but not really. It DOES have a BCR battery in it. In searching, the easiest upgrade is to upgrade to a PS32 stacker board. MTH instructions say I need to program it using a TIU. I do not have a TIU. Will the new WTIUs starting to hit the stores allow me to program the locomotive?

I love the look of the Rail King but I also wouldn't mind a TMCC "Mountain" version of the Southern steamer. The $800-1000 price tag kinda stinks though. Not sure if I should just try to sell this Rail King for parts and save up for a Mountain or if its worth upgrading it.

The end goal is for the steamer to easily pull the 6 K-Line Heavyweight Southern passenger cars that I have as I love them and the smaller Southern steamers I have cannot pull them.

I have the Base3 unit already and looking at the WTIU.

Thanks in advance to all the smarter people on there.

Original Post

Replies sorted oldest to newest

LT1PonchoLT1PonchoOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

To answer your question: Yes, the new TIU will allow you to program the engine once the new board is installed. I have done this upgrade. It is not "easy" if you are unfamiliar. Can it be done? Yes! The PS3/2 comes with good instructions. I agree that this steamer is a good one! I would look into having a qualified tech do the upgrade for you and enjoy your engine. My 2 cents

Mike

gunrunnerjohngunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER
@pault posted:
In searching, the easiest upgrade is to upgrade to a PS32 stacker board. MTH instructions say I need to program it using a TIU. I do not have a TIU.

It's pretty simple to put the PS32 board in, you'll also want the heatsink kit and a matching 4 ohm speaker.

In order to have a permanent name, you do need to have an ASC program it.  The consumer Loader program doesn't allow you to add a permanent name. I'm surprised that the boys at the store didn't tell you they could do that.  In truth, most MTH stuff like that that comes in I'll probably end up seeing on my bench.

Add Reply

Tags: TIU, WTIU, 5v, PS32, PS2
Views: 109
Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
CONTACT US
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×