Hi,
I just figured out why my couplers will not fire. #12 Blue wire loosened and come off. Ok can I splice it into #14? or somewhere else? Most likely not. Ok if not what tools needed to extract the pin from the 40 pin connector? What is the replacement pin and what crimping tool is needed? I appreciate your guidance.
you can use a pin from sewing to lift the plastic finger up and then pull the connector out of the 40-pin socket socket number 12! you can solder it to the wire or if you have a spare connector pin just replace wire in new connector and crimp. the crimp too is not cheap! the PV or purple wire is the positive voltage to supply voltage for firing coupler !
Alan
Access to this requires an OGR Forum Supporting Membership
