Skip to main content

Closed3 replies

Question on adding Legacy to 2 rail AF track.

Replies sorted oldest to newest

Rayin"S"Rayin"S"OGR Forum Member
Yes the one wire from the command base and this to the base rail on the AF loop. To improve signal on the AF loop if you are using TMCC motive power a .1 mfd cap across the two wires going to the AF loop will help. You can get more detail at "Carl's S gauge empire".
Ray
 
 
Originally Posted by Chris Lonero:

I'm sure this is a basic question but I'm not sure. I have Legacy on my 0-84 loop and I want to add Legacy to my small 2 rail AF track. Am I taking one more wire from the U post on the command base to on side of the 2 rail?    Thanks guy's 

 

Views: 389
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×