A customer at the shop I service for is looking for a Railscope part. It is the Jack that plugs into the back of the Railscope TV, (EXT. ANT). One end is a round 'phono' jack and the other end has two screws that an antenna connection wire screws to ('F' type coaxial).
Any ideas?
Replies sorted oldest to newest
John, the only thing I could suggest is to take the television and your instruction sheet to Radio Shack, if no luck there, in Pottsville there is a store called Moyer Electronics, just off Route 61, you could give them a call, and see if you could fax or scan a copy of your instruction sheet, they could look at it and see if they might have something that would make a trip worthwhile. Their phone number is 570-622-7866. The address is 330 East Norwegian St, Pottsville PA. If you have to make the journey, email me and I can give you directions, it isn't hard to find. LMK.
That little hard-to-find, easy-to-misplace part is actually a 3.5mm 75 ohm to 300 ohm matching transformer:
Or more precisely, I guess, "300 to 75 Ohm, 5 to 900 MHz, indoor matching transformer coupler with balun and 3.5 mm plug"
Access to this requires an OGR Forum Supporting Membership
