Greetings Everyone,
Here's another lighting project that I just completed. It is a 1/50 School Bus made by Realtoy. it has 3 separate circuits consisting of Yellow Wig-Wags, Red Wig-Wags and Headlights/Taillights. There are 3 separate switches that control each function. Power is via 2 coin cell 2032 batteries installed in a holder under the bus. Not the Fire Truck that some of you wanted to see but I'm working up to it. I have added a video below. Again, thanks to all who commented on my Amtrak Police Cruiser.
Chief Bob (Retired)
You've found your niche, Bob.
I think you are also inspiring the rest of us to give this a try someday.
Location of the two "Wig-Wag" circuit boards and the three micro-switches also proved to be difficult because I didn't want to have to remove any of the seats that are visible through the windows. 
The battery holder was simply hot-glued to the bottom of the bus after assembly. I'm planning on an Ohio State Patrol Cruiser as my next project and I'll post upon completion. Thanks again guys! 
