So using a Cab-1 and TMCC on Railsounds 4, you can set an engines top speed by pressing "Set", the get the engine to the top speed, and then press"Boost". What are the commands for this function in Legacy? We tried the old commands, and they didn't work. Does this function exsist in Legacy?
Thanks in Advance
Bill K
Replies sorted oldest to newest
with it already running the speed you want, push ENG (Number) and then its the lower right hand button, opposite the start button. Push and hold it until the screen says its set.
The directions are on Page 35 of your manual. With the engine at the desired high speed limit. 1)Press and release the Eng or TR address button
2)Press and hold the speed limit Touch Screen Icon
3)Speed Limit Set will appear at the top of your display screen
4)Speed limit is set
When the speed limit is set the speed limit icon will appear inverted.
Ron
Set Speed Limit
With your engine or train at the desired high speed limit,
1. Press and release the ENG or TR address button
2. Press and hold the speed limit Touch-Screen ICON
3. SPEED LIMIT SET will appear at the top of your display screen
4. Speed Limit is set.
You beat me to it Ron. 
As slow as I type I'm usually the loser.
You win this round, but don't get complacent. 
Why Thank You!
Access to this requires an OGR Forum Supporting Membership
