We all know the story, a few of us but sadly not enough of us wanted to order a Lionel operating "Spy Vs. Spy" boxcar. It was disappointing to hear of the cancellation due to lack of interest and potential cost. But, what to do, as for me, I decided to mix a few ingredients of what was available, add a bit of my imagination and create my own tribute to this great "Mad" cartoon series. I plan on doing at least three pieces of rolling stock; the following photos reflect my first attempt, enjoy.
Replies sorted oldest to newest
Das Boot, Where did you find the black "Spy" figure? I would like to
start the same project. I have taken Lego figures and adapted them to
the bobbing cars with a little Dremeling, super glue and lots of PSI.
UnclePeteRR
UnclePeteRR posted:Das Boot, Where did you find the black "Spy" figure? I would like to
start the same project. I have taken Lego figures and adapted them to
the bobbing cars with a little Dremeling, super glue and lots of PSI.
UnclePeteRR
On Ebay, the two spy figures (2 3/4" tall) and a little comic book come from "Running Press." The items came out in 2010; secondary market prices vary from cheap to quite expensive, be patient and you will get a decent deal. The figures are lightweight and easy to cut with a Dremel tool (Take off the legs and create a compatible hole for the bobbing device to attach). Also, due to the long nose, you will have to enlarge the roof opening and and even create a small notch.
I will be starting a second car for the "white spy" next week, will be experimenting with Spy "NASCAR" decals, have fun.
don't forget to add...
with a build date of 1-17-21 would be a nice tribute to Antonio Prohias.
Access to this requires an OGR Forum Supporting Membership
