Tires on my Wms Class A have shrunk in width and no longer fill the groove. One has blown. Which bolt(s) and rods do I remove? Eight tires in all. Wheel diameter at rim is 37mm so I figure 35 mm tires, maybe smaller(?).
If it is on wheel with eccentric crank, you maybe able to remove the other 2 bolts on the front wheels and slide it over the rods to get to wheel. You may have to remove brake, and also the linkage to get it on. G
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!