all of a sudden I can only run my legacy locos from the legacy cab. it also will trow the switches but TMCC locos do not respond. I can run the TMCC locos with my old TMCC hand held just fine. any Ideas. Rick
Original Post
Replies sorted oldest to newest
Make sure they are set to either TMCC or Cab1 as the control type in the Info menu for each TMCC engine.
I have been running them all with either cab for several years. not sure why that would have changed. have to get the book out to see how to check that
Select the engine, push info, turn the red know until you are on control type. Select TMCC or Cab1.
Worth checking.
it worked. wonder how they all got changed. thanks Rick
Gremlins. 
