Tmcc unresponsive

You might try resets on your TMCC engines, I don't know if you are controlling these with DCS or TMCC but the reset is the first thing I would try.

Ray

Well, since all of them do it, I'd be looking at common causes.  Sounds like the command base or remote have a problem.

Are you running the older CAB1 or Legacy CAB2?  Have you checked the batteries in the remote?  Have you made sure that the command base has a PROPER grounded outlet connection?

Yup reset did it all working.

What did you reset?

I reset the 3 tmcc engines and all is good 2 where a gp9 and 1 was a gg1 all older tmcc so I don't run that offen but went well. I am more a mth guy so never really run my lionel stuff.

It's pretty amazing that all the TMCC stuff needed a reset, I've been running it a long time and never seen something like that!

John, I find so much of these control systems amazing, and they make trains so much more fun.

Ray

I'll remember that fix.

I had the exact same issue. Tried another cab 1 remote and all is well.

Don't ya just love the remote control world?

Larry

Jeff,

   I am kind of new to Legacy/TMCC however Guns has a real good point, having to reset every TMCC engine is a might strange.   I would be looking at your remote control or TMCC Base as the real problem, some how I can't imagine every TMCC engine needing to be reset at the same time.  Your real problem may reoccur some time in the future.

PCRR/Dave

Pine creek no it has been working fine on all engines once I did that to all of them no problem now.

Jeff,

   Great I hope that really does fix the problem permanently.

PCRR/Dave