Skip to main content

Replies sorted oldest to newest

unless your layout is very small, a track cleaning car just spreads the crud around. after the first few feet the pad or roller is dirty.  a track cleaning car with a scotch brite type pad is good to remove oxidation, but you should follow up with a rag with denatured alcohol or some other fast drying cleaning fluid. nothing beats elbow grease for cleaning track

I use a track cleaning car on may layout that is not easily reached, tunnels or areas that the scenery would have to be moved to get at a section of track.

 

As far as spreading the crud thats coming off the tracks around I guess I never thought much about that.

The track cleaning car I have has a Scotch Brite pad on the bottom of it that can be replaced or flipped over and use the other side when it gets dirty.

 

 For the rest of the track I use Goo Gone Product which is citrus based, and some old bath towels cut up in small pieces to wipe the track clean.

 

I then follow up going over the track with a sanding block that I got at Lowes.

I think everybody's right, it does takes some good old elbow grease to clean the track correctly.

 

You can defiantly see a difference how engines operate once the track has been cleaned.

Dave, I agree that cleaning wheels is important.  I usually have to clean loco wheels in particular more often than in the past.  My pilot wheels also get dirty.  I have also cleaned rolling stock wheels but that was some time ago.  How often do you do that? 
Originally Posted by David from Dearborn:

Track - dry microfiber cleaning cloth by hand.

Wheels - Goo Gone, Q-tips and paper towels.

 

You need to do BOTH or you're just wasting your time.

 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×