Skip to main content

(Disclaimer:  It will be quite a few pennies.   The base materials here ran me about 3,000 pennies.  Still, that's not bad!)

I've been wanting a steeplecab loco for some time now.  My previous attempt, the "Crocodile", was interesting, but not really a true shorty steeplecab... 

GEDC0457

This current project started with a $15 K-line S2 switcher from the last NW Arkansas train show...

GEDC1872

...and a couple of slopeback tenders, one Marx and one Lionel.   (The hopper car markings stand for "Those Adorable Gi-raffes".  That's my story and I'm sticking to it.)   

GEDC1874

A cab was sourced from an old MPC U-boat shell, and the lot was taped together for test fitting.  

GEDC1880GEDC1881GEDC1882GEDC1883

A gi-raffe fits just fine in the window opening! 

GEDC1887

Someone noted that the pantograph really should have been held down with electrical tape instead of masking tape.  Well, the customer is always right... 

GEDC1888

The two tender ends were held together by .030" plates cut from Evergreen sheet styrene. 

GEDC1889GEDC1890GEDC1891GEDC1892

I decided to reinstall the sides from one of the tenders in order to add strength... 

GEDC1893GEDC1894

In future builds, I'll probably leave the coal bunker on one of the slopeback tenders and just remove the coal. 

(to be continued) 

Attachments

Images (15)
  • GEDC0457
  • GEDC1872
  • GEDC1874
  • GEDC1880
  • GEDC1881
  • GEDC1882
  • GEDC1883
  • GEDC1887
  • GEDC1888
  • GEDC1889
  • GEDC1890
  • GEDC1891
  • GEDC1892
  • GEDC1893
  • GEDC1894
Last edited by M. Mitchell Marmel
Original Post

Replies sorted oldest to newest

M. Mitchell Marmel posted:

(Disclaimer:  It will be quite a few pennies.   The base materials here ran me about 3,000 pennies.  Still, that's not bad!)

I've been wanting a steeplecab loco for some time now.  My previous attempt, the "Crocodile", was interesting, but not really a true shorty steeplecab... 

GEDC0457

This current project started with a $15 K-line S2 switcher from the last NW Arkansas train show...

GEDC1872

...and a couple of slopeback tenders, one Marx and one Lionel.   (The hopper car markings stand for "Those Adorable Gi-raffes".  That's my story and I'm sticking to it.)   

GEDC1874

A cab was sourced from an old MPC U-boat shell, and the lot was taped together for test fitting.  

GEDC1880GEDC1881GEDC1882GEDC1883

A gi-raffe fits just fine in the window opening! 

GEDC1887

Someone noted that the pantograph really should have been held down with electrical tape instead of masking tape.  Well, the customer is always right... 

GEDC1888

The two tender ends were held together by .030" plates cut from Evergreen sheet styrene. 

GEDC1889GEDC1890GEDC1891GEDC1892

I decided to reinstall the sides from one of the tenders in order to add strength... 

GEDC1893GEDC1894

In future builds, I'll probably leave the coal bunker on one of the slopeback tenders and just remove the coal. 

(to be continued) 

Great job Mitch !

Part Two:  

Here, the cab is test fit after the cement set on the lower shell.  

GEDC1895GEDC1896

The other side of the cab.  Rather rough shape after having been cut free from the shell, but some 220 grit wet-or-dry helped: 

GEDC1897

A good source of .010 styrene:  "For Sale" signs from your local big box, farm store et cetera.   Note the "#6 PS" label.  The only difference between this stuff and .010 Evergreen sheet styrene is the printing on it, which needs to be sanded off before cementing.   

GEDC1901

A chunk is cemented into place.  

GEDC1903

At this point, I scrounged bits together to mount a front coupler.  Wound up cutting down an old Lionel coupler to fit, and holding it together with black hair bands.  Not pretty, but it gets the job done. 

GEDC1904

Test fitting the cab end  before trimming to size. 

GEDC1905

Square Plastruct tubing forms bosses for the chassis screws. 

GEDC1906

The tender ends are trimmed down and styrene ends applied.  

GEDC1907GEDC1908

The little beggar will pull quite a consist!  

(to be continued) 

Mitch 

Attachments

Images (10)
  • GEDC1895
  • GEDC1896
  • GEDC1897
  • GEDC1901
  • GEDC1903
  • GEDC1904
  • GEDC1905
  • GEDC1906
  • GEDC1907
  • GEDC1908
Videos (1)
GEDC1910
Adriatic posted:

T A & G says he... hee hee 

It's amazing how many filthy minds are out there.  What's wrong with the Texas, Alabama and Georgia Railway?   

Signalwoman posted:

awesome work! i've been wanting to do something like this with 2 mpc slopebacks i have in my parts drawer. 

I actually wanna get a couple MPC slopebacks for my next steeplecab.  I used them to build the Crocodile, and it's a snap to add working headlights to 'em! 

Mitch 

M. Mitchell Marmel posted:
Signalwoman posted:

awesome work! i've been wanting to do something like this with 2 mpc slopebacks i have in my parts drawer. 

I actually wanna get a couple MPC slopebacks for my next steeplecab.  I used them to build the Crocodile, and it's a snap to add working headlights to 'em! 

Mitch 

my thoughts exactly! 

Part The Third!  

Fortescue demonstrates the NASCAR approach to boarding the locomotive:

GEDC1915GEDC1916GEDC1917GEDC1918GEDC1919

For those less athletically minded, an alternate method is offered: 

GEDC1920

Back to the workshop, where the B end cab windows are roughed in: 

GEDC1921

In order to appease the naysayers,  side doors and ladders are installed. 

GEDC1922

Squadron Green putty covers a multitude of sins. 

GEDC1923

@CBS072 kindly donated a headlight/numberboard casting, which is installed at this point. 

GEDC1924

Rather than relocate the lamp socket, I fabricated a jumper using the bayonet base of a burned-out bulb:

GEDC1925

Time for the trolley pole and roofwalk!  The lines are to locate the dead center of the cab, or near enough. 

GEDC1926

A roofwalk is fabricated from strip basswood. 

GEDC1927

The pole is fitted. It could, in future, potentially take power from overhead wires. 

GEDC1928

Pole hooks are fabricated from brass wire and installed. 

GEDC1929GEDC1930

Time to cement the cab to the body!  Note the plastic window insert.  A piece of clear plastic from an old parts drawer was cut to fit the gap in the B end.  

GEDC1931

A bit of filing and sanding,  and it's off to the paint shop! 

GEDC1934

The chassis sides, steps and endrails are sprayed a light yellow, which is what I had on hand. 

GEDC1935

Final assembly!  Razorback logo stickers will have to wait until I get some in stock. 

GEDC1936

Off to the layout for a test run!  

GEDC1938GEDC1939

You may wonder why "Bessie", as I've dubbed the steeplecab, isn't in Razorback Red?  Well, a) I think steeplecabs look better in black; and b) gloss black paint hides a variety of sins, bodyworkwise. 

Anyhow, that's my story and I'm sticking to it.  I do plan on revisiting this project using different tender shells and cabs.  Watch this space!  ;-) 

Mitch 

Attachments

Images (22)
  • GEDC1915
  • GEDC1916
  • GEDC1917
  • GEDC1918
  • GEDC1919
  • GEDC1920
  • GEDC1921
  • GEDC1922
  • GEDC1923
  • GEDC1924
  • GEDC1925
  • GEDC1926
  • GEDC1927
  • GEDC1928
  • GEDC1929
  • GEDC1930
  • GEDC1931
  • GEDC1934
  • GEDC1935
  • GEDC1936
  • GEDC1938
  • GEDC1939
Videos (1)
GEDC1940

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×