Hi guys: I am an old timer who is building a 24'x52' layout, I have about 700' or more of Gar-Graves track and run my trains with MTH DCS and Lionel Legacy and I want LCS also and in order to installed it I have to download the Lionel App, I already have an Ipad, a Lionel WiFi module, a couple of Lionel sensor track and more LCS modules on order, my problem is (and excuse me my ignorance) I do not even know what the heck is an application and of course, how to download the Lionel app. to my Ipad, here is where I need your help guys, this great Forum always help me.
Replies sorted oldest to newest
No problem. On your IPad you should find one of the icons on the screen is marked “App Store” tap on it to open the store. Then you will see a search icon in the lower right corner of the screen. Tap on that and then type in “Lionel LCS”.
It should then show the LCS app and then tap on the “Get” icon.
hope that helps
Nick
Note that in the 2018 catalog, there is a new sensor track product for installing sensors in track other than Fastrack. For someone with a lot of other manufacturer's track, it's a very useful product.
Thank you for the help Nick, unfortunately after I type Lionel LCS never show LCS app and nothing happen.
After typing “Lionel LCS” hit the enter button. Then you should see the app and the “Get” icon.
Nick
Gunrunnerjohn wrote...
"Note that in the 2018 catalog, there is a new sensor track product for installing sensors in track other than Fastrack. For someone with a lot of other manufacturer's track, it's a very useful product."
Can the sensor be used to control signals and gates? And, will I be able to install under Ross track?
No, it feeds data to the LCS system. You can program the sensor track to drive the SC2 or similar to control the gates.
The whole point of the new sensor track product is for installations under track like Ross, so obviously that answer is yes.
Finally I was able to download the Lionel App to my Ipod and then I install the Lionel WiFi module as per Lionel manual (very simple installation), the software in my Legacy Base is 1.6, set the switches to access point and Base, "Settings" app in my Ipod locate the "Lionel LCS 31F8, waited for the connection to activate and launch the LCS-aware application to control my layout, the red and the green LED on the WiFi module came ON for a second and the red LED went Off right away and the green LED blinks and blinks and keep blinking, never stay ON and a little window show in my Ipod: "Failed to Connect", try again and the same message, at this point I don't know what to do, very frustrate, I am disappointment with Lionel WiFi, does anybody knows the solution?
When I first installed the LCS module on my layout, I had a similar problem. I believe that the ipad's mail application was causing the disconnection to the LCS system. It's been a while so I don't recall the details but it may have had something to do with the mail app constantly trying to log onto our home's wifi.
I ended up using an older ipad, in which I disabled the email account, and it has worked fine.