Skip to main content

@Steamfan77- Keep that up Andy and you are going to have to hire landscapers soon.....

@luvindemtrains- I have fond memories of our local Woolworth's growing up Dave. We had them, and a 5&10 in the same shopping center. Paper route money went a long way.

Nothing much for me on the layout to report. I'm waiting on parts from GRJ to tune up my new Boston and Maine RS-3. I did clear some LIRR equipment off (sorry Andy ), to make room to run my Santa Fe F3's once I finish some minor repairs.

Bob

Got the last of my tables, lift sections in for the along the wall temporary layout.  Also painted the plywood.  I was helped greatly by the book from the Forum section Building a Layout (think that is it, with the late Backshop author's layout) where he detailed lift sections.  I was happy how they work, even with my tables not attached to the walls (although I found I should brace them against the walls).

Was great to have the last two weekends to work on this and should have trains running before the fall semester starts and wipes out my free time...

Attachments

Images (3)
  • AlongWall3: Lift section (other visible toward the left upper corner
  • AlongWall4: Starting the painting.  Those are albums hanging on the wall including the Grand Funk Railroad cover with the train wreck :)
  • AlongWall2: The landing point for the lift section.  The guides keep it aligned well.

Scott you did a very nice job on the building. It reminds me of growing up in W Va and going with my Dad when he visited customers. He sold insurance to coal mines.

Jeff you have continued a beautiful memory. Thanks for sharing it.

Peter good job on the ballast. We have a ballast king which saves a lot of time when ballasting. It is not being used at present and we would be glad to loan it out. If you want to give it a try, let me know and we can meet somewhere to hand it off.

We have continued making progress on the layout. Charlie and Steve were a tremendous help in getting TIU 2 working. I knew nothing about a “super TIU” but have them now. All MTH engines are loaded into the remotes and all work.

Both  transformers are in place and are wired awaiting new construction. Two of four AIUs are in place; two more have been ordered.

EC395C47-B54F-4110-B120-0001D195E58E              AB281956-0AA7-41C4-994E-3C6E3D9F223E



Rich returned from trout fishing yesterday… he and Pat caught over 100. He was here right after lunch and ready to start on the new floor. The flooring crew arrived and soon slabs of marble were being put in place. What a fantastic difference it makes.

2FE8E7A3-7AF0-48CA-AD1F-507F9ABC97AC    1E4CD850-1C7D-46F4-8739-4FDC375454FB



1737A006-6A20-438C-9884-B43B1E9893CF          EACE8EAE-8F79-48BC-BDDF-A0ABB2DB161C



Paula painted the walls in two end rooms. In the central section, the main walls are Colonial Red. The walls and floor are perfect for the mahogany counter that Rich is building. He is also cutting the walls that fit between the central lobby and end rooms.

1737A006-6A20-438C-9884-B43B1E9893CF               564BEA4A-2B3E-4716-A90B-AC746B1AA0CE



E92CB786-B537-4695-A90A-37604819E482


A train schedule board circa June, 1955 will be on the rear wall. No photo as copyright.

Attachments

Images (8)
  • E92CB786-B537-4695-A90A-37604819E482
  • 564BEA4A-2B3E-4716-A90B-AC746B1AA0CE
  • 1737A006-6A20-438C-9884-B43B1E9893CF
  • 2FE8E7A3-7AF0-48CA-AD1F-507F9ABC97AC
  • 1E4CD850-1C7D-46F4-8739-4FDC375454FB
  • EACE8EAE-8F79-48BC-BDDF-A0ABB2DB161C
  • EC395C47-B54F-4110-B120-0001D195E58E
  • AB281956-0AA7-41C4-994E-3C6E3D9F223E

Managed to get ONE ceiling-mounted LED panel light installed, only took most of the afternoon, lol.   These Lithonia Lighting 2x4 panels are meant to drop into a suspended ceiling, good plan at the old basement, but needed a new plan at this basement.  Their flush-mount kit to the rescue !   Yikes, easier said than done, at least for me !   Is it square to the wall, are all 4 sides square - so the LED panel slides in & is retained properly, is it wired right ? ....the answer, finally, is yes !  The next 3 should go smoother, I now IMG_3126have a plan !  Rich in SD

Attachments

Images (1)
  • IMG_3126

I really enjoyed all of your updates.  Everyone is making great progress.   I sure wish I had some of your skills in my skillset, that's for sure!

My goal this weekend was to get the retaining wall completed on the southern incline and detail the the Rockville bridge a bit.  Progress was slower than expected due to rain (except for dry brushing at the end I paint outside) and my search for appropriate size and color "boulders".

Here's the rest of the retaining wall (yes, both sides are done):

20220807_225629

For the Rockville bridge, the slots on the base for the bridge piers are too wide and there is an unsightly gap (at least to my eyes).  My goal was to install "boulders" around the bases to hide the gap.  I went to several streams in my area until I found something along the lines of what I was looking for.  Here are the results after glueing in place:

20220807_225722

I also wanted to add real sand to the cover the fake sand on the base as well as make a beach but I didn't have time to get that done.   Hopefully this weekend.

-Greg

Attachments

Images (2)
  • 20220807_225629
  • 20220807_225722
Last edited by Greg Houser
@Greg Houser posted:

20220807_225629

For the Rockville bridge, the slots on the base for the bridge piers are too wide and there is an unsightly gap (at least to my eyes).  My goal was to install "boulders" around the bases to hide the gap.  I went to several streams in my area until I found something along the lines of what I was looking for.  Here are the results after glueing in place:

20220807_225722

-Greg

Greg,

Nice work, it’s looking really good! Your water looks very refreshing; I’m ready to jump in. It’s 90 degrees here.

Greg we really like the retaining walls and need to build a lot of them, at least 100 feet and 10” high. That appears to translate into significant $$$ unless we find a reduce the height/use another type wall.

Any ideas?

Thanks



Paula went to the post office and picked up her new grass insertion module, a RTS Greenkeeper 55KV.  She can’t wait to try it out.

B7D3DC14-02F6-4606-9B19-3C7C5C24A434          F7DFDA5F-219D-49F4-AB4F-F33FBF933E53

It might weigh 8 ounces, if that much.  Should be interesting.

Attachments

Images (2)
  • B7D3DC14-02F6-4606-9B19-3C7C5C24A434
  • F7DFDA5F-219D-49F4-AB4F-F33FBF933E53
@Bill Webb posted:

Greg we really like the retaining walls and need to build a lot of them, at least 100 feet and 10” high. That appears to translate into significant $$$ unless we find a reduce the height/use another type wall.

Any ideas?

Thanks



Paula went to the post office and picked up her new grass insertion module, a RTS Greenkeeper 55KV.  She can’t wait to try it out.

B7D3DC14-02F6-4606-9B19-3C7C5C24A434          F7DFDA5F-219D-49F4-AB4F-F33FBF933E53

It might weigh 8 ounces, if that much.  Should be interesting.

I would make them out of foam.  There's a company called Green Stuff World which specializes in Dungeons and Dragons type wargaming.  They make textured rolling pins - just press and roll over the foam and it puts a pattern in the foam.   Here's a youtube tutorial:

https://www.youtube.com/watch?v=V5N7FFwS2KM

I'd suggest scribing them yourself but at 100' and 10" high it would take forever.   I'd invest in a good industrial hot foam cutter than you can just push an 8' length of foam through to get a piece that's 1/2" thick or so.  Something like this:

https://www.goldstartool.com/h...-cutting-machine.htm

And then use a textured rolling pin.

That's some impressive space to have a layout!

Let us know how your experience with the Greenkeeper is.  I have a home-made static grass applicator that works well enough up to 4 - 6mm and am thinking about a more powerful unit down the road.

-Greg

Hi guys, I am so far behind on what is going on here it would take me an hour to comment on everyone's great work! It took me a little while just to read everyone's post for the last time I was here and you're all doing great and Amazing projects! I have nothing to share with you and I hope to be able to get back to the train room someday soon! LOL

It has been a little busy here and I hope to be done next week sometime, at least in my own mind I think I will, but that could change due to the CEO and her ideas! LOL

I hope you all have a great week and find time to have fun with your layouts and trains!

https://ogrforum.com/...handling-door-wheels

The wheels have arrived, courtesy of @AlanRail:

GEDC2579

Almost a shame to cut 'em off the sprues... 

GEDC2580

Here's a mockup photo of what I have in mind: 

s-l1600

The basic idea in my alternate universe is that the El in Philadelphia got extended to the Frankford Arsenal (about half a mile from the Bridge St. terminal) and from the Ferries to the Philadelphia Navy Base.  The Q (Quartermaster) class of cars were designed to haul supplies and equipment between the two military sites.  The walls of the cars would be reinforced steel, and the roofs would be blowaway canvas.  Thus, if any ammo went off, any blast would be vented upwards more-or-less harmlessly, and since the cars would be running on the elevated tracks, no risk to street traffic...

Anyhow, I look forward to working on this in the autumn! 

The basic components will be a double truck Bowser/Pittman Brill and a milk car shell... 

And thanks again to AlanRail!   

Mitch

Attachments

Images (3)
  • GEDC2579
  • GEDC2580
  • s-l1600

https://ogrforum.com/...handling-door-wheels

The wheels have arrived, courtesy of @AlanRail:

GEDC2579

Almost a shame to cut 'em off the sprues... 

GEDC2580

Here's a mockup photo of what I have in mind:

s-l1600

The basic idea in my alternate universe is that the El in Philadelphia got extended to the Frankford Arsenal (about half a mile from the Bridge St. terminal) and from the Ferries to the Philadelphia Navy Base.  The Q (Quartermaster) class of cars were designed to haul supplies and equipment between the two military sites.  The walls of the cars would be reinforced steel, and the roofs would be blowaway canvas.  Thus, if any ammo went off, any blast would be vented upwards more-or-less harmlessly, and since the cars would be running on the elevated tracks, no risk to street traffic...

Anyhow, I look forward to working on this in the autumn! 

The basic components will be a double truck Bowser/Pittman Brill and a milk car shell...

And thanks again to AlanRail!   

Mitch

I can’t wait to see this! Please send progress pictures!

Go Navy!

https://ogrforum.com/...handling-door-wheels



s-l1600

The walls of the cars would be reinforced steel, and the roofs would be blowaway canvas.  Thus, if any ammo went off, any blast would be vented upwards more-or-less harmlessly, and since the cars would be running on the elevated tracks, no risk to street traffic...



Mitch

Oh WHAT could possibly go wrong!!!

Mitch this is going to be fun to watch.

Bob, thanks for the idea. We have never tried making molds and will put that on the list right behind the station. We have an expert plaster man… our retired orthopedic surgeon is an expert with casts.

Greg thanks for the suggestions and videos. We are going to try this too. The rolling pin is a major time saver. We had looked at the hot foam cutter at York for years and never been ready. Looks as if we are now.

Seth Paula has Christmas cactus blooming 9-10 months a year. She can be the static grass guru.

The past two weeks have been difficult but today she can say that she is cancer free. God is good.

Yesterday I rewired the lighting in the front part of the Roanoke passenger station. Then Rich arrived with two small walls and the ticket counter. We cut the walls to fit, painted them, installed the counter, and by then the walls were dry enough to put them in. Last, we installed a beam to hang two chandeliers from and then tested the lights. All six sections and the chandeliers worked.



61796E2A-C14F-45BE-9DCF-08115C7A07CB              542EC653-2A8A-400A-A969-D1D342B5852F



02D29207-BFF8-4F0A-9519-9CE512B2636F            C8DC0E42-005A-40F2-BDA9-C00B4FE428E5



437BC440-FF41-4EB1-9866-7E2F275D643A



This morning Paula donned her interior decorator’s uniform and started by installing the schedule board from June, 1955. Then she went to the train room and went thru our supply of interior and exterior accessories (stuff) and half of her people. She brought in items to consider and the box of Arttista figures. We began buying these items about five years ago and recently acquired some from Don Jones. Don you will recognize things from Mr Johnson’s collection when you see the station.


E1A8B703-3E83-4867-9626-9DB998C3F6C6

Next Paula has to install what she has chosen and then we can complete the chandeliers and replace the roof sections.

Attachments

Images (6)
  • E1A8B703-3E83-4867-9626-9DB998C3F6C6
  • C8DC0E42-005A-40F2-BDA9-C00B4FE428E5
  • 437BC440-FF41-4EB1-9866-7E2F275D643A
  • 02D29207-BFF8-4F0A-9519-9CE512B2636F
  • 542EC653-2A8A-400A-A969-D1D342B5852F
  • 61796E2A-C14F-45BE-9DCF-08115C7A07CB
Last edited by Bill Webb

Street Running.
80D66E2A-7AC0-45FA-BACA-6EE5F7CCDBE8

I have memories of being in my Dads car on the waterfront in Brooklyn NY about 1949. He had to dodge steam engines moving boxcars from the wharf to warehouses. There was another area where the LIRR ran in a cut across Brooklyn from the docks to Long Island At McDonald Ave there was a switch and they would push  freight cars up onto the trolley tracks. Many were destined for the Coney Island subway yards

C460D0A5-6D9C-4AC0-A99C-E9D880361099EBB64669-C7BB-41F7-AC6D-053E35A0E6F4I’m trying to capture my memories and create a street operation. My problem is that the engines and caboose negotiate the tight Streets curves, the boxcar does not. It’s a little longer than the caboose and the wheel sets hit the scale coupler mounting .

I would appreciate any input on how to modify the boxcar.

Attachments

Images (4)
  • 80D66E2A-7AC0-45FA-BACA-6EE5F7CCDBE8
  • C460D0A5-6D9C-4AC0-A99C-E9D880361099
  • EBB64669-C7BB-41F7-AC6D-053E35A0E6F4
  • 373722E7-C999-410C-98B3-89CFEB5A26BF
@pennsyfan posted:

I can’t wait to see this! Please send progress pictures!

Go Navy!

Keep watching this fall! 

@Apples55 posted:

Oh WHAT could possibly go wrong!!!

Fortescue + high explosives?  Nothing at all! 

@Apples55 posted:

I think Mitch is the Gomez Addams of the OGR Forum!!!

@Bill Webb posted:

Thanks. Melanoma is scary. The doctors jumped on it immediately.

Great news! 

Mitch

I had some time between conference calls this morning (gotta love that telework!), so I thought I'd quickly lube up and take one of my shelf queens for a spin on the layout.  I selected our first MTH locomotive, a conventional 4-6-2 Hudson (my kids and I had many good times with her). However, when I started removing her from the shelf, I didn't realize that two flatcars with my meticulously crafted, painted, and detailed military models and figures were attached to the tender coupler.  Needless to say, I  launched them on a maiden flight to my trainroom floor. After swallowing my heart, which had lodged in my throat and wiping away my tears, I spent the past hour with a flashlight on my hands and knees scouring for all of the broken pieces.  I think I got everything and overall, it could've been much worse - at least I didn't drop the engine and the two flatcars seem ok, only suffering broken brake wheels.  Looking forward to my new, unscheduled, project of gluing everything back together this weekend. 



IMG_1217

IMG_1218

Attachments

Images (2)
  • IMG_1217
  • IMG_1218

I can relate to that; I’ve had some close calls that way. My latest fiasco was test running a locomotive, and it stalled at the other end of the layout. I went over there and played with the e unit I reversed it because I was using the main for my test and it was occupied. I thought it would be slow enough that I could get back to the controls. Well it took of and I tried to chase it and I tripped. I knock over a stool that had 7 new MTH Christmas cars and some postwar and MPC.  It hit the floor and I hit it. I faired better than the post war and the MPC. I broke the rear truck on a 2400 observation and a plastic truck on a boxcar. MY Daughter asked about the cut on my head. I told her I got hit by a train. Oh the chassis being tested; it stopped when it ran into the loco of the stopped train. No harm done there.

I had some time between conference calls this morning (gotta love that telework!), so I thought I'd quickly lube up and take one of my shelf queens for a spin on the layout.  I selected our first MTH locomotive, a conventional 4-6-2 Hudson (my kids and I had many good times with her). However, when I started removing her from the shelf, I didn't realize that two flatcars with my meticulously crafted, painted, and detailed military models and figures were attached to the tender coupler.  Needless to say, I  launched them on a maiden flight to my trainroom floor. After swallowing my heart, which had lodged in my throat and wiping away my tears, I spent the past hour with a flashlight on my hands and knees scouring for all of the broken pieces.  I think I got everything and overall, it could've been much worse - at least I didn't drop the engine and the two flatcars seem ok, only suffering broken brake wheels.  Looking forward to my new, unscheduled, project of gluing everything back together this weekend.



IMG_1217

IMG_1218

I assume the Department of the Army will want to do a full investigation......

All kidding aside, that really sucks. That's why I don't couple cars together on the shelves.

@pennsyfan- Another unfortunate story. Who knew model trains were a contact sport.

@Bill Webb- Glad to hear Paula is OK.

Bob

@RSJB18 posted:

I assume the Department of the Army will want to do a full investigation......

All kidding aside, that really sucks. That's why I don't couple cars together on the shelves.

@pennsyfan- Another unfortunate story. Who knew model trains were a contact sport.

@Bill Webb- Glad to hear Paula is OK.

Bob

"That's why I don't couple cars together on the shelves"  - Lesson learned the hard way, Bob.  Yes, all papers have been filed with the department and I await adjudication, LOL!

@pennsyfan - Hit by a train! LOL! Heartbreaking, but glad you didn't have worse than a cut.

Last edited by Strap Hanger

Well Strap Hanger and Pennsyfan I am terribly sorry these “accidents” which recently occurred…

I am certainly not immune from such situations, such as the tripping/falling and pulling attached cars from the train shelves along with the beautiful expensive engines we dearly love.

In fact even if they do occur I flat out quit explaining what has just occurred to my lovely loving wife. While limping and wiping blood I don’t release nor disclose the private information 😝.  

Of course I would get from her, “I’m certainly glad you did not get hurt, can you please run to town for the short grocery list now? “  Along with, “well that’s definitely a lesson that you must watch what you’re doing! “😜😜 Did you break that really expensive engine we talked about this week?😏

Since Wednesday I have been doing “bench work” on the benches for my MTH passenger depot.  
And yes, while I am on my way to the grocery I must stop at the True Value for a supply of new glue.

Attachments

Images (1)
  • 765BE3EA-7383-4385-8DDD-6D96F573A8D7: Bench work on benches
@Seth Thomas posted:

The last three engines that I have purchased recently new and/used each one was a problem.  So I have been extremely hesitant to test run my Santa Fe engine I received from my servicer this week.

I am happy to report she fired up and ran with no problems, no, I’m truly excited. 😅

But I only tested in conventional operations so I have one more test with Legacy to worry about until tomorrow 😆

Looks good so far to me Seth. 

Not to worry .  Good luck with the Legacy operation.

@SIRT- Looks like your windows update went smoother than when I upgraded to v 10..... Nice work.

@Bill Webb- more software issues? Better you than me.

@Seth Thomas- Who's benches are you using? The laser kits I bought for my station platform were a PITA to cut off the sheets. I wound up breaking half the parts and had to fabricate new ones.

Your wife sounds a lot like mine......

2021-11-30 10.03.02

2021-11-26 19.20.07

Bob

Attachments

Images (2)
  • 2021-11-26 19.20.07
  • 2021-11-30 10.03.02
Last edited by RSJB18
@Seth Thomas posted:


Of course I would get from her, “I’m certainly glad you did not get hurt, can you please run to town for the short grocery list now? “  Along with, “well that’s definitely a lesson that you must watch what you’re doing! “😜😜 Did you break that really expensive engine we talked about this week?😏



Count your blessings; I long for a honey do list.

Feeling a bit nostalgic today and decided to run my first train set (1970s) that I converted to AC earlier this year.  If it goes too slowly, it will lose power over the turnouts and crossings.   It’s almost comical how quickly it has to go compared to the other trains that are running so slowly and smoothly.

Attachments

Videos (1)
IMG_1511
Last edited by VJandP

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×