Skip to main content

@pault posted:

Just picked up this 1952 Lionel 2032 Erie set with custom painted 2400 passenger cars. They have not been ran in years so I have to replace the battery, clean, lube and see if she goes around the track.

IMG_1400IMG_1413IMG_1416

Always been a fan of the Erie (2032) paint scheme, and the fantasy pass cars are just awesome looking!   Or did Erie actually have those cars?

George

@GeoPeg posted:

Always been a fan of the Erie (2032) paint scheme, and the fantasy pass cars are just awesome looking!   Or did Erie actually have those cars?

George

To be honest I don't know. I cannot find them anywhere if Lionel made them. I also cannot find them as named cars even with a different line or color scheme. I got them from a friend of a family whose husband was a huge train collector and recently passed and I now have them to remind me of him and my own father was born in 1952 (same year the Erie engines were made) and also a collector still so it wraps both "train" men in my life together on my layout.

I loved the color scheme too which is the other reason I selected the set. It'll look really sharp next to my other sets like my blue comet, southern crescent, and Texas special.

Took the D battery compartment panel off this morning on the engine and there was no battery inside so thankfully no corrosion. Huge win.

What's off the workbench......

Been fiddling with a PS2 (5V) RS3 that stopped running. Bought the engine used from Trainz and it must have an address programmed in, and since I only have a RC (no TIU), I can't reset it so I only run it conventional. For some strange reason, it decided to stop moving and wouldn't stay awake when power was cycled. I checked the BCR, etc to no avail. So I decided to reassemble it and put it on the shelf to be dealt with another day. But before it earned the title of "Hershelfish Queenus", I gave it one more try on the layout. When I powered it up, bupkas....then I noticed that my RC was on so obviously the watchdog did what it's supposed to do. Tried again with the RC off, and low and behold, she's not quite ready for the shelf! Don't ask me to eshplain Lucy.....cause I don't know. (and adult beverages were consumed to celebrate the momentous occasion.....)

2023-09-07 17.03.33

For medicinal purposes only of course......

Bob

Attachments

Images (1)
  • 2023-09-07 17.03.33
@Mark Boyce posted:

Or was it that adult beverages caused the supposed issues in the first place?  🤷‍♂️ 🙄

Im glad it is running, Bob!  👍🏻🚂

Can't say for sure Mark......I will deny any relation between the two.......

I've been dicking around with this CPR dome car. I lengthened it and fashioned the 'proper' looking truck frames to replace the Lionel issue generic ones. I was able to make the visible bearings rotate.IMG_E0271

Nice work. I like the open journals!

Bob

@pault posted:

To be honest I don't know. I cannot find them anywhere if Lionel made them. I also cannot find them as named cars even with a different line or color scheme. I got them from a friend of a family whose husband was a huge train collector and recently passed and I now have them to remind me of him and my own father was born in 1952 (same year the Erie engines were made) and also a collector still so it wraps both "train" men in my life together on my layout.

I loved the color scheme too which is the other reason I selected the set. It'll look really sharp next to my other sets like my blue comet, southern crescent, and Texas special.

Took the D battery compartment panel off this morning on the engine and there was no battery inside so thankfully no corrosion. Huge win.

Does OFF the bench count here too?

This beautiful set is up and running and she's purring like a 71 year old cougar poolside.

Attachments

Videos (1)
Video (1)

Got this Williams Hudson 5205 brand new still sealed from Trainz. A bit of a challenge this ones been. 😂.

Took the loco all apart and red n tacky all the dried factory gearing.

Added 6amp {8} diodes to tame the race horse speeds.

Added an MTH ps1 smoke unit as the suethe was a joke.

Changed the screw on the front truck of the tender to keep it from wibble wobbling.

Now awaiting Evans design leds for the passenger cars!

Attachments

Videos (1)
PXL_20230909_191342384.TS

Assembled the MTH S2 that I've been working on and gave it a test run. Overall all went well, trying to stuff 10 pounds of bologna under a 5 pound shell was a challenge, and I didn't even put a smoke unit in it.
As a refresher.... this engine was purchased from a MTH/ Cabin Fever auction, that started life as a SOO. I bought the L&NE shell since the red dot in the logo worked with the red deck. I used a PS-3/2 stacker board.

I have to open it up again to replace the electro- couplers, not sure why they aren't working.......but the rear has a short and the front doesn't work, the board fires them and the sounds play.

2023-09-10 16.10.162023-09-10 16.10.272023-09-10 16.46.09

Also have a broken handrail on the other side to deal with.

Bob

Attachments

Images (3)
  • 2023-09-10 16.10.16
  • 2023-09-10 16.10.27
  • 2023-09-10 16.46.09
Last edited by RSJB18

Bob, it runs great!!  Are you sure you really want to open it up again?  The 20 pounds of bologna may pop out and you can’t get it back in!  😮 😄  Oh it’s a switcher.  I guess you do want operating couplers!  

Thats what started to happen when I opened the Bl2 to try to compare what I did then to the F3 last week.  I quickly pushed some bologna back in and tightened it down!  😆

@Mark Boyce posted:

Bob, it runs great!!  Are you sure you really want to open it up again?  The 20 pounds of bologna may pop out and you can’t get it back in!  😮 😄  Oh it’s a switcher.  I guess you do want operating couplers!  

Thats what started to happen when I opened the Bl2 to try to compare what I did then to the F3 last week.  I quickly pushed some bologna back in and tightened it down!  😆

Mark- I'm going to have no choice to get the couplers working. Maybe I'll be able to clean up the wiring a little better too.

@Tuscan Jim- Thanks. Been a long time in the works. Nice to see it finally together.

Bob

@RSJB18 posted:

Mark- I'm going to have no choice to get the couplers working. Maybe I'll be able to clean up the wiring a little better too.

@Tuscan Jim- Thanks. Been a long time in the works. Nice to see it finally together.

Bob

Bob, I know what you mean needing the couplers.  👍🏻  I was just going to look at how I did the BL2, but it has the same problem as the F3, so why bother. 😄

@ThatGuy posted:

I am just finishing the conversation of a William scale PC GG-1, this one is near to my heart as I ran the bigger version.

Wow, I used to see those black PC GG1s at 30th St., Zoo, and even hauling freight on the Trenton Cutoff when I was a kid.  I would love to hear some stories, but those belong in the Real Trains forum and not on the Workbench thread.  Great job on the upgrade!!

OGTrains at it again! This time converting a RMT Bang S4 switcher into a Whitcomb 65 ton road switcher.

Stripped the bang down to bare frame and repainted:

DLF-09-17-2023-0073

Next painted the shell I got from @Trainguy Ken, after my last Whitcomb build Ken let me check out the prototype for the new production model using his new resin printer and I gave him some feedback, so now this production shell is a total winner!

DLF-09-17-2023-0074

Re-installed the trucks and weight, drilled new mounting holes for the crew:

DLF-09-17-2023-0076

Made some handrails for the sides and painted them all black:

DLF-09-17-2023-0078

Added a bell:

DLF-09-17-2023-0079

Still to do: install LED lighting and the Blunami 4408, this one I think is turning out better. The new production shell is very smooth and fits great, and the fact that the bang has to me very acceptable fixed pilots makes one good looking loco!

DLF-09-17-2023-0080DLF-09-17-2023-0081

Attachments

Images (7)
  • DLF-09-17-2023-0073
  • DLF-09-17-2023-0074
  • DLF-09-17-2023-0076
  • DLF-09-17-2023-0078
  • DLF-09-17-2023-0079
  • DLF-09-17-2023-0080
  • DLF-09-17-2023-0081

Here is my attempt to convert an MTH undercoated "production sample" diesel loco I recently won in a Cabin Fever Auction.

It had geared drive trucks, with the pick-up rollers, protocouplers at each end, the engineer figure, all of the cabin glass, and the horn (all in a little plastic bag ready for assembling), but no motors or circuit boards.

DSC03197DSC03199

From the many MTH RailKing spare parts I have amassed since the closure of MTH, through the Cabin Fever clearance auctions, I installed two motors, a PS1 circuit board, and a new speaker. I didn't add lights at this stage as I am still trying to figure out where you take the lighting power from on the PS1 board, that will allow the headlights to be directional.

I got it up and running with all sounds and functions (except for the headlights), and then went about painting the shell in Norfolk Southern black. I found the loco was infact an ALCO C628, and was released as a "dummy" in the Delaware Hudson livery. Oh well....I already had the Norfolk Southern decals, and I do like that railroad!!!

DSC03201DSC03202DSC03209DSC03214

I think it come up pretty good, and from a "boy from the bush" down-under in Australia. In my search for something not remotely associated with this loco, I found an original RailKing box and styrene clam-shell for this exact model. I think I got it in an earlier Cabin Fever Auction with something completely different in it.

DSC03219DSC03220

I added notes to remind me to use the Z1000 controller and not my Z4000 (don't ask me why the Z4000 won't run it.....it's one of the mysteries of life!!!) and that I have replaced the battery with a BCR. I even got clever and printed out a new label for the end of the carton, stating it is a "Norfolk Southern", and was no longer a NON- POWERED unit.

Things are great in the "Sunshine State"- Queensland, Australia.

Peter.....Buco Australia

Attachments

Images (8)
  • DSC03197
  • DSC03199
  • DSC03201
  • DSC03202
  • DSC03209
  • DSC03214
  • DSC03219
  • DSC03220
@Buco posted:

Here is my attempt to convert an MTH undercoated "production sample" diesel loco I recently won in a Cabin Fever Auction.

DSC03197

DSC03214

DSC03220

I added notes to remind me to use the Z1000 controller and not my Z4000 (don't ask me why the Z4000 won't run it.....it's one of the mysteries of life!!!) and that I have replaced the battery with a BCR. I even got clever and printed out a new label for the end of the carton, stating it is a "Norfolk Southern", and was no longer a NON- POWERED unit.

Things are great in the "Sunshine State"- Queensland, Australia.

Peter.....Buco Australia

Quite a remarkable transition from the production sample ,  Buco.   Nice.

Not sure about the Z4000 not being able to run the C628.       Maybe getting in touch with Gunrunner John might help solve that issue.     

I don't have a Z4000 but I thought it would not be a problem if one of the other Z transformers (  Z500 , Z750 or Z1000  )  did work.

Good idea using a BCR.    I've used them a long time with excellent results.

@Buco posted:

From the many MTH RailKing spare parts I have amassed since the closure of MTH, through the Cabin Fever clearance auctions, I installed two motors, a PS1 circuit board, and a new speaker. I didn't add lights at this stage as I am still trying to figure out where you take the lighting power from on the PS1 board, that will allow the headlights to be directional.

Peter, the directional lighting from the PS/1 board comes from the blue (front) and green (rear) molex connectors on the DCRU board near the relays and large diodes.  They're only 1.5V as they just stick a couple of diodes in to generate the voltage for small grain of wheat 1.5V bulbs.

Many of the diesels had a lighting control board that took the 1.5V output from the DCRU and switched a 6VDC output for better lighting.

It's possible to use these outputs for higher voltages, but it involves using an opto-coupler and a power source.  I did a little kludge board to be able to generate a MARS light from the LED outputs from a Legacy board using opto-couplers and buffers for sufficient output power.

<--- click on graphic to expand --->

___LV Lighting Board

Attachments

Images (3)
  • mceclip0
  • ___LV Lighting Board
  • mceclip1

About two weeks ago I finished the Pizzaland kit from Blair Line LLC.  It was my first craftsman kit, so I took my time with preparing the pieces, painting them, assembling and so forth.  (The kit was also a Christmas gift from my wife, so you know I couldn't screw it up, no matter what!)  Dale Rush, the owner of Blair Line, provided me some great advice by email beyond the great kit instructions and the helpful hints paper on his website.

13 - Finished building - Pizzaland

I detailed the back room by adding a close-to-a-pizza oven from Etsy's Shop Mini Decor and More shop.  Some plain old "rattle can" Rustoleum flat silver and black spray paint worked great to create that "well used" pizza oven look.  The "chef" is the "soda jerk" figure sold by Model Tech Studios.  If you look in the front door or window at just the right angle, you can see the chef and pizza oven through the open doorway to the back room.

IMG_0838

In the front room, I improvised a bar and three stools from the same Etsy vendor to create a counter with a stool and two stools in the front window.  The counterman is a "Wally figure" from one of the RMT train cars I purchased years ago.  The two young girls on the window stools and the woman standing at the counter are Woodland Scenics products I purchased from Pat's Trains in Wheeling WV.  The gooseneck lamps in both the front and back rooms were purchased from Model Tech Studios.  I positioned the counterman so when you look through the front door he blocks almost all of the wiring running down the wall from view.  The pizza and sandwich printouts along were the chef holding the pizza were some things I found in my miscellaneous scenery supplies; I have no idea who made them.

IMG_0836

The finished building has that "noo-jurzee-gritty" look of many small pizza parlors I was in during my New Jersey childhood.  The two girls with their cell phones in the front window have an uncanny resemblance to two of my grand-nieces or two of my granddaughters--take your pick!

12 - front view - Pizzaland

I think the model came out well.

Lesson Learned:  If someone builds a Pizzaland of their own, I'd suggest they add a second interior lamp to the front section to light it up a bit more.

Attachments

Images (4)
  • 13 - Finished building - Pizzaland
  • IMG_0838
  • IMG_0836
  • 12 - front view - Pizzaland

Here's the completion of the Whitcomb build.

Blunami 4408 installed:

DLF-09-18-2023-0082

Making and installing the lighting wiring:

DLF-09-18-2023-0083



Hooking it all up:

DLF-09-18-2023-0084

Lettered, setup, and testing:

DLF-09-18-2023-0085

Using the new style shell and the RMT frame over the K Line S2 frame I think makes for a better looking model of this locomotive that has never been done before in O gauge. If you are looking for something different, I highly recommend this kit.

Attachments

Images (4)
  • DLF-09-18-2023-0082
  • DLF-09-18-2023-0083
  • DLF-09-18-2023-0084
  • DLF-09-18-2023-0085
@Lou1985 posted:

Put together the Premier Southern Pacific Alco PA I've had for a bit. It's a PS1 chassis, PS2 shell, and a PS3 diesel kit. Made a custom sound file to announce The City of San Francisco as well.



Looks great Lou. Question- I noticed the lights flash when you powered up the engine. I'm wrapping up a PS3/2 stacker install on a Alco S2 and have seen the same condition with the lighting. Any idea why they do this?
The electrician in me has my OCD meter pinned......

Bob

Attachments

Videos (1)
2023-08-06 15.42.17

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
CONTACT US
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×