Skip to main content

1 reply

Williams Berkshire smoke unit upgrade

SitkaSitkaOGR Forum Member SUPPORTING MEMBER

There is a topic on a Williams Berk smoke unit upgrade but has been closed. Looking for some guidance on how to add a MTH or Lionel fan driven smoke unit and how to wire it. I did add some pictures but if someone can reply with a drawing on where to put wires and part numbers for the upgrade. Any help would be great. I do have a couple PS1 but I mostly have PW Lionel that I repair.

Thanks Again Mark

The small board with the smoke unit, the light is getting power from that board would I need that for the light after the fact? Or where should I put those wires? Thanks

Attachments

Hide
Images (3)
  • mceclip0
  • mceclip1
  • mceclip2
Original Post
SitkaSitkaOGR Forum Member SUPPORTING MEMBER

Maybe someone can answer this, what is that black box for? The light and the smoke unit gets its power from this board, I bought a K-Line fan driven smoke unit, so I took the shell off my K-line Big Boy to see how it was wired, and it's pretty straight forward. I like to use that board for power, so what is the black component used for?  And will I need it since the K-Line big boy doesn't have one?  Plus, if i take it off I can make everything fit. Did an Edit went to Williams parts and it's a voltage regulator board.

Thanks Mark

Attachments

Hide
Images (2)
  • mceclip0
  • mceclip1
Last edited by Sitka

Add Reply

Views: 150
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×